channels of the Astra system to the correct table FREE or DMX. The procedure takes approx. 30 min. Your individually prepared FAV table remains unaffected.
The automatic tuning system saves the empty channels continuously according to the ascending Astra transponder number and the DMX channels according to their transmitted channel number. A repeated ATS run does not delete any channel which cannot be received at present, however, it adds new channels to the existing table.
>switch on standby mode with 
>start the tuning system with 
during the first 5 sec. (display is bright)
The procedure is indicated in the display with “A.T.S.”
You can only interrupt the automatic tuning system by pressing the 
Afterwards, you can prepare your own table according to 6.3.
6.3 Individual channel table
The ASTRASTAR AX 1 offers the possibility of saving 50 of your favourite channels in an individual table. In this table you can collect free channels as well as DMX channels.
>set the desired channel table with 
or 
>set the favourite channel with the
> press the recessed |
| (save) |
P and the bottom free channel position appear in the display.
>On request, you can set a different channel position with the 
> press again |
| (save) |
>interrupt the procedure with 
or
6.4 Directly entering channel data
In order to avoid having to start the tuning system for the storage of each newly broadcasted channel, you can directly enter the receiving data of this transmitter. The direct entry is also adequate for future digital radio channels of other satellites which are transmitting in the same norm. The receiving data of new transmitters are published in corresponding magazines, e.g.
INFOSAT.
The ASTRASTAR AX 1 identifies whether the currently received channel is a free channel or a DMX channel and offers the possibility of saving this new channel to channel positions 241 to 255 of the respective table. The table FREE or DMX is automatically selected.
The receiving parameters are indicated in the display.
> press 
and
12