General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press the POWER button on the panel and hold it for about 10 seconds to restore the unit to the original factory settings.
Power on/off
Press any button on the panel or the STANDBY button on the RC to turn the unit on. Press the POWER button on the panel or the STANDBY button on the RC to turn the unit off.
Note: After the unit is off, the volume level and radio current settings will be memorized, and when you turn the unit on it will resume the stored status that you set.
Volume control
Rotate the VOL knob on the panel clockwise or when the monitor is opened press the + button on the RC to increase the volume level.
Rotate the VOL knob on the panel anticlockwise or when the monitor is opened press the – button on the RC to decrease the volume level.
Mute function
Press the MUTE button to mute volume control. Press it again or press the +/- buttons on the RC or rotate the VOL knob on the panel to resume the volume.
15