Installation in a Vehicle, Placing Base and Cradle

KEN.4064 H2EReceiver/Car Man 11/19/04 9:44 AM Page 6

Installation in a Vehicle

Note: Do not put Here2Everywhere in the Car Docking Cradle until you have completed the cradle installation.

6Step 1: Placing the

Base and Cradle

First, determine where you want to mount

Here2Everywhere.

There are two options for installing the

Here2Everywhere. Select the option and location that provides good visibility of and access to Here2Everywhere’s front panel while maintaining a safe driving experience.

Pivot

Option 1: Windshield Mount

•Do not install Here2Everywhere on the windshield if it may obstruct your view while driving.

•Attach the Car Docking Cradle to the Car

Windshield Docking Base using the four enclosed screws.

• Loosen the base nut on the Car Windshield Docking Base so that the suction cup portion rotates easily. Do not remove the base nut entirely.

• Make sure the suction cup

lever is in the up position.

• Position the suction cup base on the desired wind

shield location. The word “PRESS” should be upright.

• Press the button

Note: To remove the Car Windshield Docking Base, return the lever to the up position before attempting to remove the Base.

Option 2: Console
(Professional) Mount	7

Ask the dealer where you purchased your SYSTEM-H2EC about professional installation options. One option is to have the dealer mount the Pivot of the Car Windshield Docking Base to the console or other available location in the vehicle. There are four screws to remove. The Pivot screw holes match the AMPS standard for mounting systems, so any AMPS-compatible bracket for your vehicle will accept the Pivot of the Docking Base. Many car audio dealers carry these brackets.

Base nut

Pivot (where the cradle attaches)

Suction cup base

Button

Lever

ANT

DC12V AUDIOOUT FMOUT

Power

Audio Output

FM Out

Antenna Input

marked “PRESS” while the suction cup is on the windshield. Then rotate the lever down, keeping the button pressed down at the same time.

• The suction cup base should be firmly attached to the windshield.

If you choose to do the console mount yourself, please observe the following guidelines:

•Do not install Here2Everywhere where it may obstruct your view through the windshield or your view of your vehicle’s indicator displays.

•Do not install Here2Everywhere where it will hinder your access to the vehicle’s controls.

•Do not install Here2Everywhere where it may hinder the function of safety devices such as an airbag. Doing so may prevent the air-bag from functioning properly in the event of an accident.