Installing Batteries Remote, Basic Operation

KEN.4064 H2EReceiver/Car Man 11/19/04 9:44 AM Page 12

Installing Batteries

in the Remote

Note: Do not expose the remote control to high temperatures or direct sunlight. This could damage

12or deform the case and result in battery leakage or other harm.

1.Remove the battery cover as shown.

2.Install two AAA batteries as shown.

3.Replace the battery cover.

Activating Your SIRIUS Subscription

Before you can listen to Here2Everywhere, you must subscribe to SIRIUS Satellite Radio’s service.

Follow these steps to activate your service:

the connector at the bottom of the unit makes proper contact in the cradle.

3.Press the power button to turn Here2Everywhere on. After displaying the SIRIUS logo, the display will read “Acquiring Signal.” Once the SIRIUS satellite signal is received, the display will change to “Call 888-539-SIRIUS to Subscribe.”

Note: If the display reads, “Updating Channels,” the receiver is getting the latest channel listing from the SIRIUS satellites. Give it 5 minutes to complete before moving to the next step.

4.If your Here2Everywhere has been properly con- nected and the antenna is receiving the SIRIUS signal (Preview Channel #184), you will hear audio. If you do not hear audio, re-orient the antenna until you do. (See Antenna Aiming, on pg. 23 to use the ANTENNA SIGNAL screen.)

•Channel #184 is the SIRIUS Preview Channel. You will not be able to tune to any other channels until you activate your SIRIUS subscription.

Note: If you’ve previously activated your subscrip- tion and then deactivated it, the Preview Channel will be mute. You will still see the message, “Call 888-539-SIRIUS to Subscribe.”

6.Your unit’s unique 12-digit SIRIUS ID Number will be displayed (below). Write the number down, and have your credit card handy.

7.You can also call SIRIUS toll-free at 1-888-539- SIRIUS (7474), and the operator will instruct you. (You can also contact SIRIUS on the Internet at: www.siriusradio.com and click on the “Activate” link.)

8.Once your subscription has been activated, the display will read “Subscription Updated” for a few seconds. Press any button. The Here2Everywhere will return to the Default display screen. At this point, try turning the Control Knob. You should have access to many channels now.

Removing Here2Everywhere From the Car Docking Cradle

When docked in the Car Docking Cradle,

Here2Everywhere has a secure locking mechanism

to hold it in place while the vehicle is in motion. 13 To remove Here2Everywhere from the Car Docking Cradle, press the small button on the back of the

unit and gently slide Here2Everywhere out.

Basic Operation

After you have activated your SIRIUS subscription, the Default Display screen will appear. The Default Display screen has two font sizes: medium and large. You can change font sizes by pressing the Display button.

Channel			Channel
number			name
Signal		Artist and
strength		song title
indicator
Category	Clock	Preset bank
Category	Clock		indicator
name			indicator
name			(A-E)
			(A-E)

1.Make sure that Here2Everywhere is properly connected.

2.Place Here2Everywhere in the Docking Station by sliding the unit all the way into the cradle so that

5.Press the menu button on Here2Everywhere to enter the Menu Options. Make sure the first item, “SIRIUS ID,” is highlighted, then press the Control Knob (or the remote Select button).

		On the screen, you’ll see the current SIRIUS channel
	Default Screen	number (001), the channel name, the artist and
	Default Screen	song title, the category, the time, the preset bank
		song title, the category, the time, the preset bank