Panasonic CX-D3000U operating instructions Common, DVD/Video CD/CD

Troubleshooting Tips

❐Common

Trouble

No power.

No sound.

Cause/Step

Car’s engine switch is not on.

➡Turn your car’s ignition switch to ACC or ON.

Cables are not correctly connected.

➡Connect cables correctly.

➡Connect the battery cable to the terminal that is always active.

➡Connect the accessory cable to your car’s ACC source.

➡Connect the grounding wire to a metal part of the car.

Fuse is burnt out.

➡Call the store where you purchased the unit, or your nearest Servicenter (see the attached sheet) and ask for fuse replacement.

Cables are not correctly connected.

➡Connect cables correctly.

Condensation (dew).

➡Wait for a while before use.

E

N

G

L

I

S

H

18

❐DVD/Video CD/CD

Trouble

The disc is inside but there is no sound.

Cause/Step

Disc is upside down.

➡Place disc in the correct direction with the label side up.

≥Disc is dirty.

≥Disc has scratches.

➡Clean the disc, referring to the section on “Notes on Disc”. (page 34)

➡The player can only play the following types of discs:

DVD video, Video CD, CD and CD-DA data recorded CD-R and CD-RW, and MP3 data recorded CD media (CD-ROM, CD-R, CD-RW).

➡The player may not successfully play back a CD-R/RW that is made in combination of writing software, a CD recorder (CD-R/RW drive) and a disc which are incompatible one another. Refer to instruc- tions for the concerned devices for details.

You are trying to play a dts CD or DVD.

➡The player cannot play audio on dts CDs or DVDs unless a digital surround processor is used (page 42–43).

27

CX-D3000U