Kenwood KRC-708, KRC-X858 instruction manual Station Name Preset Snps, Assigning Names

Page 15

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

NOTE

•When the local seek function is turned while auto memory entry takes place, stations with poor reception are not stored.

•When the Traffic Information function is on , only the local traffic information station frequency will be stored.

Station Name Preset (SNPS)

You can assign names to radio stations with the Station Preset Memory. Up to 32 FM stations and 16 AM stations can be assigned names.

1Adjust the frequency to the station whose name you want to enter.

NOTE

The station name preset function cannot be used when a program service name or radio text is displayed.

2Press the NAME.S button for at least two seconds.

"NAME SET" is displayed once the station name preset mode is entered.

The cursor will blink in the position where letters are entered.

3Press either the 4 or ¢ button to move the cursor to the desired position.

The 4 button moves the cursor to the left, and the ¢ button to the right.

4Each time the 38 button is pressed, the characters to be entered change as listed below.

Press the FM or AM button to display the desired character. Characters that can be displayed are as follows.

Alphabet (upper case): A ~ Z

Alphabet (lower case): a ~ z

Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]

Special characters: á à é è í ì ó ò ú ù Ñ Ç ® ß ‹ fl â ä ê ë î ï ô ö û ü ñ ç © Æ › fi

5Continue steps 3 and 4 until all the characters are chosen for the name.

NOTE

You can enter up to 8 characters for each name.

6Assigning Names

Press the NAME.S button.

The name of the station is stored in memory, and the Station Name Preset mode ends.

Also, if you make no input for 10 seconds, the name will be stored up to the point that you have entered, and the mode ends.

NOTE

•You can assign names to up to 32 FM stations and 16 AM stations.

•All the station names will be erased if you press the RESET button.

•If you want to change the name of a station, first display the name of the station (following steps 1 and 2 above), then change the letter(s) that you want by following steps 3 and 4.

— 15 —

Page 14 Page 16
Image 15
Page 14 Page 16
Contents KRC-X858 KRC-708 Contents 2WARNING 2CAUTION Safety precautionsCleaning the Faceplate Terminals General features PowerPower ON/OFF Loudness Switching ModesVolume AttenuatorBass F Adjust the center frequency of the bass Audio Control SettingSelecting mode Adjust each modeFader Adjust the fader level. Setting values Front 15 Rear Treble Adjust the treble levelMobile Preset Storing your sound settingsRecalling your sound settings Changing the Display Switching DisplayNon-Fading Output Forced ClosingPage Removing the Faceplate Removing the faceplateReattaching the Faceplate Tuner features Faceplate Angle AdjustmentAdjusting faceplate angle Tuning Station Preset MemoryAuto Memory Entry Assigning Names Station Name Preset SnpsStation Name Preset Play Snpp Switching Display for TunerCanceling mode during input Radio Text Scroll RDS featuresAlarm RDS Radio Data SystemConfirming Program Type Switching to Other Stations with the Same Type of ProgramCanceling Program Type Function During Its Operation Program Type PTY FunctionCassette player features Registration of a station as a PTYTo register a non-RDS station as a program type Playing Cassette Tapes Using Dolby B Noise ReductionSwitching Tape Types Using Direct Program Search System DpssMusic Repeat Blank SkipExternal disc control features Switching the Tape displayTape counter display Playing Discs Playing Disc modePausing and Restarting Disc Play OperationSwitching Display for Discs Track SearchFast Forwarding and Reversing Disc Play Making a Forward Disc Search Canceling Direct Disc Search While It Is OperatingPresetting Disc Names Dnps Track Scan Track / Disc RepeatRapid display forward / reverse Disc Name Preset Play DnppTo cancel Dnpp mode Random PlayText / Title Scroll Menu settingsTouch Sensor Tone Manual Time AdjustmentCalendar Adjustment Menu SystemAdjusting the date Calendar ModeAdjusting Time Automatically Memo ModeAutomatic Time Adjustment Entering the month or day setting modeTraffic Information Function Manual Open Button SettingClean Reception System Circuit Crsc Switching to a Different Traffic Information StationSecurity Code If you press the Reset button or remove the batterySwitching preout Contrast AdjustmentSwitching Graphic Display Time setting for removing the faceplateDual Zone System External Amp ControlKEX/ec4/dB Sound Coordinate system Loading and Replacing the Batteries Basic Operations of remoteTuner features Cassette player featuresBasic operations External disc control features Installation Procedure AccessoriesACC Connecting Wires to TerminalsLocking the faceplate to the unit Installation non-Japanese carsRemoving the hard rubber frame Removing the UnitInstallation Japanese-cars Problem Possible Cause Solution Troubleshooting GuideCD/External disc control mode Eject No Disc Blank No Track No Panel Hold FM tuner section SpecificationsPage Page Page Page Page

KRC-708, KRC-X858 specifications

The Kenwood KRC-X858 and KRC-708 are two standout models in the realm of car audio systems, designed to enhance the driving experience with advanced technologies and user-friendly features. Both models reflect Kenwood's commitment to quality sound, innovative design, and versatility, catering to a wide range of audio preferences.

Starting with the Kenwood KRC-X858, this model is known for its impressive power output and high-quality audio performance. It boasts a maximum power of 50 watts across four channels, ensuring that listeners can enjoy crystal-clear sound even at higher volumes. The KRC-X858 features a built-in CD player and is compatible with MP3 and WMA formats, making it easy to play a variety of digital music files.

One of the key highlights of the KRC-X858 is its adjustable bass boost, allowing users to customize their audio experience to meet their specific preferences. The unit also comes equipped with a 4-band EQ, which enables precise tuning of treble, midrange, and bass frequencies. This adaptability ensures an optimized listening experience, regardless of the music genre.

In terms of connectivity, the KRC-X858 features a front auxiliary input, which is perfect for connecting portable devices such as smartphones or tablets. Furthermore, it offers compatibility with Kenwood’s remote control, providing users with the convenience of adjusting their audio settings without needing to reach for the unit itself.

On the other hand, the Kenwood KRC-708 is equally impressive with its own set of features. This model also supports CD playback, alongside MP3 and WMA file formats, allowing users to enjoy their favorite tracks stored on various media types. The KRC-708 includes a built-in digital synthesizer tuner, delivering clear reception for AM/FM stations.

An appealing characteristic of the KRC-708 is its user-friendly interface, featuring a large, easy-to-read display with adjustable colors. This ensures visibility in different lighting conditions, making it practical for daytime and nighttime driving. The inclusion of a detachable faceplate adds a layer of security, allowing users to remove the front panel when the vehicle is unattended.

Both models prioritize sound quality and convenience, making them suitable choices for audiophiles and casual listeners alike. Their robust build quality and lasting performance showcase Kenwood’s dedication to creating reliable audio equipment for the modern driver. With features designed to enhance connectivity and customizable sound settings, the KRC-X858 and KRC-708 stand out as exceptional choices for those looking to upgrade their vehicle's audio system.
Top Page Image Contents