Kenwood KRC-X858 Dual Zone System, External Amp Control, KEX/ec4/dB Sound Coordinate system

Page 36

Menu settings

English

Function of the KRC-X858

Dual Zone System

The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on or off when the source is set to the AUX mode.

Display and setting:

"Zone 2 ON" : The dual zone system function is on.

"Zone 2 OFF" : The dual zone system function is off.

NOTE

•You must purchase the optional KCA-S210A/CA-C1AX/KDC- CPS82/KDC-CX82/KDC-CPS85/KDC-CX85 device before you can use this function.

•You can choose to send the AUX input through the rear channel, and the unit’s tuner or tape source through the front channel.

•The Bass, Treble and Loudness adjustments do not affect the rear channel.

•When the Dual zone system is turned on, the External disc control features cannot be used.

•When you set the Dual zone system to on while the non-fading preout is switched on, the sound of the non-fading preout does not be outputted.

External Amp Control

Adjust the bass boost level of the external amplifier using the main unit.

Display and setting:

"AMP BASS FLT" : Bass boost level is flat.

"AMP BASS +6" : Bass boost level is low (+6dB).

"AMP BASS +12" : Bass boost level is high (+12dB).

NOTE

As of December 1999, the power amplifiers controllable by the main unit are as follows: KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T

KEX/ec4/dB (Sound Coordinate system)

When this system is set to on, the sound coordinate factors (Bass Frequency, Bass quality, Bass extension, and Treble frequency) appear during the audio control mode.

Display and setting:

"Kex/ec4/dB set ON" : The sound coordinate factors appear and can be adjusted.

"Kex/ec4/dB set OFF" : The sound coordinate factors are not appeared.

— 36 —

Page 35 Page 37
Image 36
Page 35 Page 37
Contents KRC-X858 KRC-708 Contents Safety precautions 2WARNING 2CAUTIONCleaning the Faceplate Terminals General features PowerPower ON/OFF Switching Modes VolumeAttenuator LoudnessAudio Control Setting Selecting modeAdjust each mode Bass F Adjust the center frequency of the bassTreble Adjust the treble level Fader Adjust the fader level. Setting values Front 15 RearMobile Preset Storing your sound settingsRecalling your sound settings Switching Display Non-Fading OutputForced Closing Changing the DisplayPage Removing the Faceplate Removing the faceplateReattaching the Faceplate Tuner features Faceplate Angle AdjustmentAdjusting faceplate angle Tuning Station Preset MemoryAuto Memory Entry Station Name Preset Snps Assigning NamesStation Name Preset Play Snpp Switching Display for TunerCanceling mode during input RDS features AlarmRDS Radio Data System Radio Text ScrollSwitching to Other Stations with the Same Type of Program Canceling Program Type Function During Its OperationProgram Type PTY Function Confirming Program TypeCassette player features Registration of a station as a PTYTo register a non-RDS station as a program type Using Dolby B Noise Reduction Switching Tape TypesUsing Direct Program Search System Dpss Playing Cassette TapesBlank Skip Music RepeatExternal disc control features Switching the Tape displayTape counter display Playing Disc mode Pausing and Restarting Disc PlayOperation Playing DiscsSwitching Display for Discs Track SearchFast Forwarding and Reversing Disc Play Canceling Direct Disc Search While It Is Operating Making a Forward Disc SearchPresetting Disc Names Dnps Track / Disc Repeat Track ScanDisc Name Preset Play Dnpp To cancel Dnpp modeRandom Play Rapid display forward / reverseMenu settings Text / Title ScrollManual Time Adjustment Calendar AdjustmentMenu System Touch Sensor ToneCalendar Mode Adjusting the dateMemo Mode Automatic Time AdjustmentEntering the month or day setting mode Adjusting Time AutomaticallyManual Open Button Setting Clean Reception System Circuit CrscSwitching to a Different Traffic Information Station Traffic Information FunctionIf you press the Reset button or remove the battery Security CodeContrast Adjustment Switching Graphic DisplayTime setting for removing the faceplate Switching preoutDual Zone System External Amp ControlKEX/ec4/dB Sound Coordinate system Basic Operations of remote Loading and Replacing the BatteriesTuner features Cassette player featuresBasic operations External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation non-Japanese cars Locking the faceplate to the unitRemoving the Unit Removing the hard rubber frameInstallation Japanese-cars Troubleshooting Guide Problem Possible Cause SolutionCD/External disc control mode Eject No Disc Blank No Track No Panel Hold Specifications FM tuner sectionPage Page Page Page Page

KRC-708, KRC-X858 specifications

The Kenwood KRC-X858 and KRC-708 are two standout models in the realm of car audio systems, designed to enhance the driving experience with advanced technologies and user-friendly features. Both models reflect Kenwood's commitment to quality sound, innovative design, and versatility, catering to a wide range of audio preferences.

Starting with the Kenwood KRC-X858, this model is known for its impressive power output and high-quality audio performance. It boasts a maximum power of 50 watts across four channels, ensuring that listeners can enjoy crystal-clear sound even at higher volumes. The KRC-X858 features a built-in CD player and is compatible with MP3 and WMA formats, making it easy to play a variety of digital music files.

One of the key highlights of the KRC-X858 is its adjustable bass boost, allowing users to customize their audio experience to meet their specific preferences. The unit also comes equipped with a 4-band EQ, which enables precise tuning of treble, midrange, and bass frequencies. This adaptability ensures an optimized listening experience, regardless of the music genre.

In terms of connectivity, the KRC-X858 features a front auxiliary input, which is perfect for connecting portable devices such as smartphones or tablets. Furthermore, it offers compatibility with Kenwood’s remote control, providing users with the convenience of adjusting their audio settings without needing to reach for the unit itself.

On the other hand, the Kenwood KRC-708 is equally impressive with its own set of features. This model also supports CD playback, alongside MP3 and WMA file formats, allowing users to enjoy their favorite tracks stored on various media types. The KRC-708 includes a built-in digital synthesizer tuner, delivering clear reception for AM/FM stations.

An appealing characteristic of the KRC-708 is its user-friendly interface, featuring a large, easy-to-read display with adjustable colors. This ensures visibility in different lighting conditions, making it practical for daytime and nighttime driving. The inclusion of a detachable faceplate adds a layer of security, allowing users to remove the front panel when the vehicle is unattended.

Both models prioritize sound quality and convenience, making them suitable choices for audiophiles and casual listeners alike. Their robust build quality and lasting performance showcase Kenwood’s dedication to creating reliable audio equipment for the modern driver. With features designed to enhance connectivity and customizable sound settings, the KRC-X858 and KRC-708 stand out as exceptional choices for those looking to upgrade their vehicle's audio system.
Top Page Image Contents