Kenwood KRC-X858, KRC-708 instruction manual CD/External disc control mode

Page 46

English

Troubleshooting Guide

CD/External disc control mode

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

The disc control mode cannot

No wire has been connected to the disc changer input

Connect the wire to the disc changer input terminal on

be selected.

terminal on the unit.

the unit.

 

 

 

The specified disc does not

The specified CD is quite dirty.

Clean the CD.

play, but another one plays

 

 

The CD is upside-down.

Load the CD with the labeled side up.

instead.

 

 

 

 

The disc is loaded in a different slot from that specified.

Eject the disc magazine and check the number for the

 

 

specified disc.

 

 

 

 

The disc is severely scratched.

Try another disc instead.

 

 

 

The sound skips.

Something is touching the disc changer.

Remove whatever is touching it.

 

 

 

 

The CD is scratched or dirty.

If skipping happens at the same place when the car is

 

 

stopped, something with the CD is wrong. Clean the CD.

 

 

 

The display shows that the

The computer chip in the unit is not functioning normally.

Press the reset button on the unit (see p. 4).

changer is being played, but no

 

 

sound can be heard.

 

 

 

 

 

The specified track will not

Random play or magazine random play has been

Turn off random play or magazine random play.

play.

selected.

 

 

 

 

Track repeat, disc repeat, track

The setting is not cancelled.

The settings for these functions remain on until the

scan, disc scan, random play,

 

setting to off or the disc ejected, even if the power is

and magazine random play

 

turned off or the source changed.

start by themselves.

 

 

If the following situations, consult your nearest service center:

•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.

•Even though no device (KCA-S210A, CA-C1AX, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered when switching modes.

— 46 —

Page 45 Page 47
Image 46
Page 45 Page 47
Contents KRC-X858 KRC-708 Contents Safety precautions 2WARNING 2CAUTIONCleaning the Faceplate Terminals Power General featuresPower ON/OFF Attenuator Switching ModesVolume LoudnessAdjust each mode Audio Control SettingSelecting mode Bass F Adjust the center frequency of the bassTreble Adjust the treble level Fader Adjust the fader level. Setting values Front 15 RearStoring your sound settings Mobile PresetRecalling your sound settings Forced Closing Switching DisplayNon-Fading Output Changing the DisplayPage Removing the faceplate Removing the FaceplateReattaching the Faceplate Faceplate Angle Adjustment Tuner featuresAdjusting faceplate angle Station Preset Memory TuningAuto Memory Entry Station Name Preset Snps Assigning NamesSwitching Display for Tuner Station Name Preset Play SnppCanceling mode during input RDS Radio Data System RDS featuresAlarm Radio Text ScrollProgram Type PTY Function Switching to Other Stations with the Same Type of ProgramCanceling Program Type Function During Its Operation Confirming Program TypeRegistration of a station as a PTY Cassette player featuresTo register a non-RDS station as a program type Using Direct Program Search System Dpss Using Dolby B Noise ReductionSwitching Tape Types Playing Cassette TapesBlank Skip Music RepeatSwitching the Tape display External disc control featuresTape counter display Operation Playing Disc modePausing and Restarting Disc Play Playing DiscsTrack Search Switching Display for DiscsFast Forwarding and Reversing Disc Play Canceling Direct Disc Search While It Is Operating Making a Forward Disc SearchPresetting Disc Names Dnps Track / Disc Repeat Track ScanRandom Play Disc Name Preset Play DnppTo cancel Dnpp mode Rapid display forward / reverseMenu settings Text / Title ScrollMenu System Manual Time AdjustmentCalendar Adjustment Touch Sensor ToneCalendar Mode Adjusting the dateEntering the month or day setting mode Memo ModeAutomatic Time Adjustment Adjusting Time AutomaticallySwitching to a Different Traffic Information Station Manual Open Button SettingClean Reception System Circuit Crsc Traffic Information FunctionIf you press the Reset button or remove the battery Security CodeTime setting for removing the faceplate Contrast AdjustmentSwitching Graphic Display Switching preoutExternal Amp Control Dual Zone SystemKEX/ec4/dB Sound Coordinate system Basic Operations of remote Loading and Replacing the BatteriesCassette player features Tuner featuresBasic operations External disc control features Accessories Installation ProcedureConnecting Wires to Terminals ACCInstallation non-Japanese cars Locking the faceplate to the unitRemoving the Unit Removing the hard rubber frameInstallation Japanese-cars Troubleshooting Guide Problem Possible Cause SolutionCD/External disc control mode Eject No Disc Blank No Track No Panel Hold Specifications FM tuner sectionPage Page Page Page Page

KRC-708, KRC-X858 specifications

The Kenwood KRC-X858 and KRC-708 are two standout models in the realm of car audio systems, designed to enhance the driving experience with advanced technologies and user-friendly features. Both models reflect Kenwood's commitment to quality sound, innovative design, and versatility, catering to a wide range of audio preferences.

Starting with the Kenwood KRC-X858, this model is known for its impressive power output and high-quality audio performance. It boasts a maximum power of 50 watts across four channels, ensuring that listeners can enjoy crystal-clear sound even at higher volumes. The KRC-X858 features a built-in CD player and is compatible with MP3 and WMA formats, making it easy to play a variety of digital music files.

One of the key highlights of the KRC-X858 is its adjustable bass boost, allowing users to customize their audio experience to meet their specific preferences. The unit also comes equipped with a 4-band EQ, which enables precise tuning of treble, midrange, and bass frequencies. This adaptability ensures an optimized listening experience, regardless of the music genre.

In terms of connectivity, the KRC-X858 features a front auxiliary input, which is perfect for connecting portable devices such as smartphones or tablets. Furthermore, it offers compatibility with Kenwood’s remote control, providing users with the convenience of adjusting their audio settings without needing to reach for the unit itself.

On the other hand, the Kenwood KRC-708 is equally impressive with its own set of features. This model also supports CD playback, alongside MP3 and WMA file formats, allowing users to enjoy their favorite tracks stored on various media types. The KRC-708 includes a built-in digital synthesizer tuner, delivering clear reception for AM/FM stations.

An appealing characteristic of the KRC-708 is its user-friendly interface, featuring a large, easy-to-read display with adjustable colors. This ensures visibility in different lighting conditions, making it practical for daytime and nighttime driving. The inclusion of a detachable faceplate adds a layer of security, allowing users to remove the front panel when the vehicle is unattended.

Both models prioritize sound quality and convenience, making them suitable choices for audiophiles and casual listeners alike. Their robust build quality and lasting performance showcase Kenwood’s dedication to creating reliable audio equipment for the modern driver. With features designed to enhance connectivity and customizable sound settings, the KRC-X858 and KRC-708 stand out as exceptional choices for those looking to upgrade their vehicle's audio system.
Top Page Image Contents