Kenwood KRC-708 Selectable Illumination, Contrast Adjustment, Dimmer, Switching Graphic Display

Page 35

Selectable Illumination

You can switch the color of the button illumination between green and red.

Display and setting:

"Color Green" : The color of the illumination is green.

"Color Red" : The color of the illumination is red.

Contrast Adjustment

This adjustment permits easy viewing of the display.

Display and setting:

"Contrast 0" – "Contrast 10"

NOTE

The initial setting value is "5" .

Dimmer

You can dim the display.

NOTE

The dimmer function is not available for units if the dimmer wire is not connected.

Display and setting:

"Dimmer ON" : The dimmer setting is on.

"Dimmer OFF" : The dimmer setting is off.

Switching Graphic Display

You can turn the movement of graphic display on and off. The initial setting is ON.

Display and setting:

"Graphic ON" : The graphic display works.

"Graphic OFF" : The graphic display does not work.

Black Mask

This function allows you to turn off the lower part of the display if there is too much information in the display.

Display and setting:

"BLK MASK ON" : The display will turn on by using only the upper part of the display and the IN indicator

"BLK MASK OFF" : The display will turn on by using the whole part of the display.

Time setting for removing the faceplate

You can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set, the faceplate can be removed from the faceplate bracket.

Display and setting:

"OFF WAIT" : 0s / 3s / 5s / 10s / 15s / 20s / 25s (s=sec.)

NOTE

If you do not slide the faceplate lock switch during the period which you have set, the unit’s power turns off after the control panel is automatically hidden.

Function of the KRC-X858

Switching preout

Switch the preout between the rear and non-fading. When you switch to non-fading, you can adjust the volume separately. The factory default is rear preout.

Display and setting:

"SWPRE Rear" : Rear preout

"SWPRE N-Fad" : Non-fading preout

NOTE

You cannot use the high-pass filter with non-fading preout.

— 35 —

Page 34 Page 36
Image 35
Page 34 Page 36
Contents KRC-X858 KRC-708 Contents 2WARNING 2CAUTION Safety precautionsCleaning the Faceplate Terminals Power ON/OFF General featuresPower Loudness Switching ModesVolume AttenuatorBass F Adjust the center frequency of the bass Audio Control SettingSelecting mode Adjust each modeFader Adjust the fader level. Setting values Front 15 Rear Treble Adjust the treble levelRecalling your sound settings Mobile PresetStoring your sound settings Changing the Display Switching DisplayNon-Fading Output Forced ClosingPage Reattaching the Faceplate Removing the FaceplateRemoving the faceplate Adjusting faceplate angle Tuner featuresFaceplate Angle Adjustment Auto Memory Entry TuningStation Preset Memory Assigning Names Station Name Preset SnpsCanceling mode during input Station Name Preset Play SnppSwitching Display for Tuner Radio Text Scroll RDS featuresAlarm RDS Radio Data SystemConfirming Program Type Switching to Other Stations with the Same Type of ProgramCanceling Program Type Function During Its Operation Program Type PTY FunctionTo register a non-RDS station as a program type Cassette player featuresRegistration of a station as a PTY Playing Cassette Tapes Using Dolby B Noise ReductionSwitching Tape Types Using Direct Program Search System DpssMusic Repeat Blank SkipTape counter display External disc control featuresSwitching the Tape display Playing Discs Playing Disc modePausing and Restarting Disc Play OperationFast Forwarding and Reversing Disc Play Switching Display for DiscsTrack Search Making a Forward Disc Search Canceling Direct Disc Search While It Is OperatingPresetting Disc Names Dnps Track Scan Track / Disc RepeatRapid display forward / reverse Disc Name Preset Play DnppTo cancel Dnpp mode Random PlayText / Title Scroll Menu settingsTouch Sensor Tone Manual Time AdjustmentCalendar Adjustment Menu SystemAdjusting the date Calendar ModeAdjusting Time Automatically Memo ModeAutomatic Time Adjustment Entering the month or day setting modeTraffic Information Function Manual Open Button SettingClean Reception System Circuit Crsc Switching to a Different Traffic Information StationSecurity Code If you press the Reset button or remove the batterySwitching preout Contrast AdjustmentSwitching Graphic Display Time setting for removing the faceplateKEX/ec4/dB Sound Coordinate system Dual Zone SystemExternal Amp Control Loading and Replacing the Batteries Basic Operations of remoteBasic operations Tuner featuresCassette player features External disc control features Installation Procedure AccessoriesACC Connecting Wires to TerminalsLocking the faceplate to the unit Installation non-Japanese carsRemoving the hard rubber frame Removing the UnitInstallation Japanese-cars Problem Possible Cause Solution Troubleshooting GuideCD/External disc control mode Eject No Disc Blank No Track No Panel Hold FM tuner section SpecificationsPage Page Page Page Page

KRC-708, KRC-X858 specifications

The Kenwood KRC-X858 and KRC-708 are two standout models in the realm of car audio systems, designed to enhance the driving experience with advanced technologies and user-friendly features. Both models reflect Kenwood's commitment to quality sound, innovative design, and versatility, catering to a wide range of audio preferences.

Starting with the Kenwood KRC-X858, this model is known for its impressive power output and high-quality audio performance. It boasts a maximum power of 50 watts across four channels, ensuring that listeners can enjoy crystal-clear sound even at higher volumes. The KRC-X858 features a built-in CD player and is compatible with MP3 and WMA formats, making it easy to play a variety of digital music files.

One of the key highlights of the KRC-X858 is its adjustable bass boost, allowing users to customize their audio experience to meet their specific preferences. The unit also comes equipped with a 4-band EQ, which enables precise tuning of treble, midrange, and bass frequencies. This adaptability ensures an optimized listening experience, regardless of the music genre.

In terms of connectivity, the KRC-X858 features a front auxiliary input, which is perfect for connecting portable devices such as smartphones or tablets. Furthermore, it offers compatibility with Kenwood’s remote control, providing users with the convenience of adjusting their audio settings without needing to reach for the unit itself.

On the other hand, the Kenwood KRC-708 is equally impressive with its own set of features. This model also supports CD playback, alongside MP3 and WMA file formats, allowing users to enjoy their favorite tracks stored on various media types. The KRC-708 includes a built-in digital synthesizer tuner, delivering clear reception for AM/FM stations.

An appealing characteristic of the KRC-708 is its user-friendly interface, featuring a large, easy-to-read display with adjustable colors. This ensures visibility in different lighting conditions, making it practical for daytime and nighttime driving. The inclusion of a detachable faceplate adds a layer of security, allowing users to remove the front panel when the vehicle is unattended.

Both models prioritize sound quality and convenience, making them suitable choices for audiophiles and casual listeners alike. Their robust build quality and lasting performance showcase Kenwood’s dedication to creating reliable audio equipment for the modern driver. With features designed to enhance connectivity and customizable sound settings, the KRC-X858 and KRC-708 stand out as exceptional choices for those looking to upgrade their vehicle's audio system.
Top Page Image Contents