Panasonic CQ-VD6505W manual AV Mode Selection, ¡Connect an optional external device to the AV1/AV2

English

25

AV1/AV2

Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are connected.

Preparation:

¡Connect an optional external device to the AV1/AV2.

AV Mode Selection

You can view the images and listen to the sounds from the connected external devices in the AV1/AV2 mode respectively.

qTouch “Source Button”. d

w Touch /

(AV1/AV2) on the

Source Selection

Screen.

Source Button

[SRC]
PWR
SRC	ALBUM
	FOLDER
MENU
VOL	TUNE
	TRACK
MUTE	NAVI

P-MODE

ASPECT

ASP

TILT

CQ-VD6505W

Press [SRC] to change to the desired mode.

Note:

¡You can set up the system so that the AV mode is not selected (source skip). (a page 37) (AV set to NAVI INPUT is not skipped even if SOURCE SKIP is set to ON .)

¡If no operation is performed for 10 seconds or is touched, the operation buttons disappear.

¡AV terminal is not used for the Panasonic car navigation system (available in future). Refer to NAVI SETUP for setting. (a System Upgrade

Guidebook)

To switch Operation Screen ON, touch the center of touch panel or press [ENTER] on the remote control.

26

CQ-VD6505W