OUTPUT SELECT
Output Selection
REAR MONITOR (Rear Monitor Set up)
You can have different picture and sound on the front and rear monitors at the same time.
Preparation: Connect another optional rear monitor. (a Installation Instruction)
❑When the Expansion Module (CY-EM100N, option) is disconnected:
AUTO | : same as front monitor* |
| : DVD/VCD/CD/MP3/WMA |
DVD | |
| : AV1 |
AV1 | |
| : AV2 |
AV2 |
* iPod with Video is included.
default: AUTO
Note:
¡This menu can also be opened by touching/pressing
and holding /[MENU].
¡Images are not displayed on the rear monitor in the DVD changer mode even if AUTO is selected.
❑When the Expansion Module (CY-EM100N, option) is connected:
¡Connection of the Expansion Module
¡Connection of
Note: | English | ||
|
|
| |
|
|
| |
|
|
|
|
|
|
|
|
| 20 |
|
¡The screen above shows the case that no device is connected to the Expansion Module. In such a case, the additional buttons are displayed gray and not selec- table.
¡Only single source of audio and video can come out through the Expansion Module
Example:
When a DVD changer and a TV are connected to the Expansion Module
¡ is selectable. However, the setting is not feasible because the changer is in operation on the front monitor.
¡To play the TV on the rear monitor, select
for the front monitor, or select a source other than the Expansion Module.
Preparation: Connect Bluetooth
BOTH | : Front Left/Right speaker |
|
|
L ch | : Front Left only |
|
|
R ch | : Front Right only |
default: BOTH
21