Panasonic CQ-VD6505W manual Connection with Rear View Camera, Connecting the Reverse Lead

English

15

Electrical Connections (continued)

Connection with Rear View Camera

Note:

¡Refer to the operating instructions for the connected devices, in addition.

CQ-VD6505W (Rear)		Rear View Camera
		Control Unit (option)
8 m m M A X	Camera Input
F U S E 1 5 A	Rear View Camera	(Video)
CAMERA-	(CY-RC50KW) (option)
		(Yellow)
IN	Panasonic

REVERSE

!0Power Connector

Reverse Lead (Violet/white stripe)

(Video)
(Yellow)	RCA Cord (option)

Camera Input Terminal

(Yellow)

Connecting the Reverse Lead

If using an optional rear view camera, the reverse lead must be connected.

Connect the reverse lead (violet/white stripe) to the positive (+) lead of the reverse lamp (the lamp with a clear lens that lights when the transmission gear is shifted into the reverse position).

Note:

¡Connect the reverse lead after cutting the terminal at the end. ¡Use a Reverse Extension Cord !1if needed.

Reverse lamp

Clip connector (option)

Check the reverse lamp.

Take it out of the back of the tail lamp mount.

Battery Car chassis

!1Reverse Extension Cord

(Violet/white stripe)

P

R

N

D

2 L

Transmission gear

16

CQ-VD6505W