Operations Common to Each Mode

Note:

•If you have lost your Personal Code, please contact Clarion customer service.

1.Enter your Personal Code currently set.

2.When the correct Personal Code is entered, the unit will restart from the initial startup screen.

Notes:

•When you enter a wrong Personal Code, the message “LOCK - - - -” is displayed and the Personal Code entry is prohibited for a while.

This prohibited time is changed according to the number of times of wrong code entry as follows:

•1 to 6 times: 15 seconds

•7 times or more: 15 minutes

●Turning the screen saver function on

or off

This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Press the [w] or [z] button to select the

setting.

Each time you press the [w] or [z] button, the setting changes in the following order: “MESSAGE” ↔ “ON” ↔ “OFF”

●Entering message information

Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.

∗The factory default setting is “WELCOME TO CLARION”.

2-1. Select “MESSAGE INPUT”.

3-1. Press the [ ] button.

3-2. Press and hold the [BND] button (1 sec.) to clear the old message.

3-3. Press the [x] or [v] button to move the cursor.

3-4. Press the [BND] button to select a character type. Each time you press the [BND] button, the character type changes in the following order:

Capital letters ➜ Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters…

3-5. Press the [w] or [z] button to select the desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message.

3-7. Press and hold the [ ] button (2 sec.) to store the message in memory.

∗Press and hold the [BND] button (1 sec.) to

cancel the input message. Then press and hold the [ ] button (2 sec.) to store the message and the message return to default setting.

●Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA/AAC title.

∗The factory default setting is “ON”.

2-1. Select “SCROLL”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time.

∗When you want to see the title again, in the title mode, press and hold the [DISP] button (3 sec.) to scroll the title.

●Setting the dimmer control

You can set the dimmer control “ON” or “OFF”.

∗The factory default setting is “ON”.

2-1. Select “DIMMER”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

●Anti-theft indicator

The red Anti-theft indicator is a function for prevent theft. When the ACC or POWER is off, this indicator blinks.

∗The factory default setting is “OFF”.

2-1. Select “BLINKLED”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

●Setting the external amplifier

∗The factory default setting is “OFF”.

2-1. Select “A-CANCEL”.

3-1. Press the [w] or [z] button to select “ON” or “OFF”.

• ON:

Use with connected AMP.

• OFF:

Use with inside AMP.

English

CX609E 23