| Problem | Cause | Measure |
|
| No sound heard | The device contains no MP3/ | Record MP3/WMA/AAC files properly to the device. | English |
|
| WMA/AAC files. |
| |
|
|
|
| |
|
| The files are not proper MP3/ | Use only properly encoded MP3/WMA/AAC files. | |
|
| WMA/AAC format. |
| |
|
|
|
| |
|
| Connectors are loose. | Disconnect the device and reconnect securely. | |
|
|
|
|
|
|
| Some USB portable music | Check operation of portable music player. |
|
|
| players may consume current |
|
|
|
| that exceeds the USB rating. |
|
|
|
| In this case, the unit’s |
|
|
|
| overcurrent protection circuit |
|
|
USB/MTP/iPod | The device isn’t | operates to stop the music | Disconnect the device and reconnect. If the device is |
|
The device is damaged. |
| |||
|
| playback. |
|
|
| Sound is | The MP3/WMA/AAC files are | Use only properly encoded MP3/WMA/AAC files. |
|
| interrupted or has | improperly encoded. |
|
|
| noise. |
|
|
|
|
|
|
|
|
| recognized. |
| still not recognized, try replacing with a different |
|
| Connectors are loose. |
| ||
|
|
| device. |
|
|
| According to the state of | Disconnect the device and reconnect. |
|
|
| operation on the device, the |
|
|
|
| communication fault is |
|
|
|
| caused. |
|
|
|
|
|
|
|
| Can’t insert the | The device has been inserted | Try reversing the connection direction of the device |
|
| device. | improperly. | (usually the brand name surface should be facing |
|
|
|
| left). |
|
|
|
|
|
|
|
| The connector is broken. | Replace with a new device. |
|
8. ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
| Error Display | Cause | Measure | |
CD/MP3/WMA/AAC | ERROR 2 | A CD is caught inside the CD | This is a failure of CD deck’s mechanism and consult | |
| deck and is not ejected. | your store of purchase. | ||
|
|
| ||
ERROR 3 | A CD cannot be played due | Replace with a | ||
| to scratches, etc. |
| ||
|
|
| ||
ERROR 6 | A CD is loaded | Eject the disc then reload it properly. | ||
| inside the CD deck and does |
| ||
| not play. |
| ||
|
|
| ||
| ERROR 2 | The files are not proper MP3/ | Use only properly encoded MP3/WMA/AAC files. | |
USB/MTP/iPod |
| WMA/AAC format. |
| |
|
|
| ||
ERROR 3 | The MP3/WMA/AAC files are | Use only properly encoded MP3/WMA/AAC files. | ||
(USB/MTP mode) | improperly encoded. |
| ||
|
|
| ||
CUR ERR | Overcurrent detection. | Disconnect the devices and reconnect. If the devices | ||
|
| are still not recognized, try replacing with a different | ||
|
| devices. | ||
|
|
| ||
HUB ERR | Do not support the HUB | Do not use the HUB devices. | ||
| ||||
|
| devices. |
| |
|
|
|
|
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and consult your store of purchase.
CX609E 31