Basic Operations, Setting the Magna Bass Extend

Basic Operations

When “CUSTOM” is set:

3-1.	Press the [				] button.
3-2.	Press the [x] or [v] button to select the

“BASS”/“MID”/“TREBLE” mode to adjust. 3-3. If you want to set the flat, press the [ ]

button to return to the “CUSTOM” mode, then press and hold the [ ] button

(1 sec.), bass/mid/treble characteristics become flat.

When “EXCITE/IMPACT/B-BOOST” is set:

3-2.	Press the [				] button.
3-3.	Press the [w] or [z] button to adjust the

setting in the range of –3 to +3.

∗The factory default setting is “0”.

3-4. Press the [ ] button to return to the previous mode.

●Adjusting the BASS/MID/TREBLE

This adjustment can be performed only when the BEAT EQ is set to “CUSTOM”.

Note:

•While connected with the external aplifers, please do not set the “BASS”/“MID”/“TREBLE” in the maximum level. Otherwise the speakers may be damaged.

3-2.	Press the [				] button.
3-3.	Press the [x] or [v] button to select as

following order.

“BASS<G>” ↔ “BASS<F>” ↔ “BASS<Q>” “MID<G>” ↔ “MID<F>” ↔ “MID<Q>” “TREBLE<G>” ↔ “TREBLE<F>” ↔ “TREBLE<Q>”

∗The factory default setting is “BASS<G>”. 3-4. Press the [w] or [z] button to select the

setting.

BASS<G>:The factory default setting is “0”. (Adjustment range: +7 to –7)

BASS<F>: The factory default setting is “50”. (Adjustment range: 50/100/200)

BASS<Q>:The factory default setting is “1”. (Adjustment range: 0.7/1/1.4/2)

MID<G> : The factory default setting is “0”. (Adjustment range: +7 to –7)

MID<F> : The factory default setting is “500”. (Adjustment range: 500/1K/2K)

MID<Q> : The factory default setting is “1”. (Adjustment range: 0.7/1/1.4/2)

TREBLE<G>:The factory default setting is “0”.

(Adjustment range: +7 to –7)

TREBLE<F>:The factory default setting is “10K”.

(Adjustment range: 5K/10K/15K) TREBLE<Q>:The factory default setting is “1”.

(Adjustment range: 0.7/1/1.4/2)

3-5. Press the [ ] button to return to the previous mode.

Setting the MAGNA BASS EXTEND

The MAGNA BASS EXTEND does not adjust the low frequencies like the normal sound adjustment function, but emphasizes the deep bass frequencies to provide you with a dynamic sound.

∗The factory default setting is “OFF” (off).

2-1. Select “M-B EX”.

3-1. Press [w] or [z] button to select “ON” or “OFF”.

●Adjusting the balance

2-1. Select “BALANCE”.

3-1. Press the [w] or [z] button to adjust the balance of the right and left speakers.

∗The factory default setting is “CENTER” (center). (Adjustment range: RIGHT12 to LEFT12 (right 12 to left 12))

●Adjusting the fader

2-1. Select “FADER”.

3-1. Press the [w] or [z] button to adjust the balance of the rear and front speakers.

∗The factory default setting is “CENTER” (center). (Adjustment range: FRONT12 to REAR12 (front 12 to rear 12))

●Adjusting the subwoofer

You can set the low pass filter of subwoofer.

This adjustment can be performed only when the “REAR/S-W” is set to “S-WOOFER” (page 24).

2-1. Select “LPF”.

3-1. Press the [w] or [z] button to select as following order.

“THROUGH” ↔ “60” ↔ “90” ↔ “120”

∗The factory default setting is “THROUGH”.

●Adjusting the subwoofer output volume

You can adjust the volume output from the unit’s subwoofer output terminal.

This adjustment can be performed only when the “REAR/S-W” is set to “S-WOOFER” (page 24).

English

CX609E9