4.OPERATIONS
Turning the power on/off
1.Press the [SAT] button to turn the power on/ off.
When the power is turned on, “SAT” is dis- played in the Operation status indication and then the display is changed to the channel being received.
Verifying your Sirius ID
1.Press and hold the [SS] button for 1 second or longer to enter the Adjust mode.
2.Press the [a] or [d] to select the “ESN >>”.
∗When the unit enters the SIRIUS ID display mode, “ESN>>” is displayed and then the dis- play is changed to the
3.Press the [z] button to change the
∗To display the
4.Press the [a] or [d] button to return the previous mode.
Selecting a band
1.Press the [BAND] button to select a band.
BAND indication (“SAT1”, “SAT2” or “SAT3”) is light in the display.
Tuning mode
There are two channel selection modes: seek mode and manual mode.
●Manual tuning
Any channel including channels without broad- casts and channels not covered by the contract can be selected during manual tuning.
1.Press and hold the [BAND] (BND) button for 1 second or longer.
∗This changes the seek mode to manual mode and the “MANU” indicator on the display lights. When this operation is performed in manual mode, the seek mode is engaged and the “MANU” indicator on the display goes off.
Notes:
•The receiver automatically reverts to the seek mode when the [a] or [d] button is not used for 7 seconds in the manual mode.
2.Press the [a] or [d] button. The receiver moves to channels above or below the cur- rent channel one by one.
3. Press and hold the [a] or [d] for 1 second | English |
| |
or longer. |
|
The receiver moves to seek channels below |
|
or above the current channel and the chan- |
|
nel found when either button is released is |
|
received. |
|
●Seek tuning
Only channels that can be received are selected while channels without broadcasts and channels not covered by the contract are automatically skipped.
1.Press the [a] or [d] button.
The receiver seeks the next available chan- nel below or above the current channel.
2.Press and hold the [a] or [d] button.
The receiver moves to seek channels below or above the current channel. If the channel found when either button is released is avail- able that channel is received. Otherwise, seeking continues until an available channel is found.
Preset memory
3 bands are available for preset memory and 6 channels for each band, a total of 18 channels can be stored in memory.
The indication concerning the preset memory is displayed both in the BAND indication for the band being received (“SAT1”, “SAT2”, or “SAT3”) and in the Preset channel indication for the preset number.
●Recalling a preset station
1.Press the [w] or [z] button to recall a pre- set station. Each time the button is pressed, preset stations are recalled in a sequential order.
∗When the
∗When the button is pressed, the sound is muted and reception channel data are dis- played in the Operation status indication in the following order.
Channel number (for example “CH 051”) ➜ abbreviated
DSC920S 5