Clarion DSC920S owner manual Operations, Scan function, Receiving stations selected by category

Page 6

Operations

English

Manual memory

1.Select a channel to be memorized.

2.Press the [P-M] button to enter the Preset memory mode.

The reception channel number (“CH 051”) in the Operation status indication blinks and the PRESET indication light.

3.Press the [w] or [z] button to select a pre- set number to be memorized.

The selected preset number is displayed in the Preset channel indication.

4.Press and hold the [P-M] button for 2 sec- onds or longer to store the channel being re- ceived in memory.

If the [P-M] button is released within less than 2 seconds, preset memory is cancelled and the Preset memory mode is terminated.

Scan function

There are two scan modes: a category scan mode and a preset scan mode.

Receiving stations selected by category

1.Press the [CAT] button to enter the category selection mode. CAT indication is light in the display.

2.Press the [w] or [z] button to select a cat- egory.

3.Press the [a] or [d] button to tune in a sta- tion.

Notes:

When the category selection mode is entered, the category of the last received channel is displayed first.

The category selection mode is canceled when no channel with the selected category can be found.

Press the [a] or [d] button within 7 seconds af- ter a channel has been set to continue seeking channels up or down. The category selection mode is canceled and normal reception is re- sumed if no operation is performed for 7 seconds.

During scanning channels are displayed in ab- breviated form and the display mode cannot be switched.

Category scanning

In a category scan, broadcast channels in the same category as the current channel are se- lected about every 10 seconds.

1.Press the [SCAN] button to start a category scan.

2.Press the [SCAN] button to cancel a cat- egory scan.

Note:

Category scanning is not available when no cat- egory is defined for the current channel.

Preset scan

A preset scan scans the channels (up to 18 channels) stored in the preset memory about every 10 seconds.

1.Press and hold the [SCAN] button for 1 sec- ond or longer to start a preset scan.

2.Press the [SCAN] button to cancel a preset scan.

Switching the text display

1.Press the [DISP] button. Each time the

[DISP] button is pressed, the item changes in the following order:

channel number channel name (long) title artist category R-TEXT

When the [DISP] button is pressed while the Screen saver mode is engaged, the displayed text cannot be switched. If this happens, re- lease the Screen saver mode and scroll the displayed text again.

If the reception channel is changed, the dis- play changes in the order of channel number channel name (short) and then the original display mode is resumed.

When there is no text information, the indica- tion -------- will appear on the display.

About the scrolling of the displayed text

Scrolling is performed once when the title being selected is changed or when the [DISP] button is pressed and held for 1 second or longer.

Scrolling is not performed when a channel number, abbreviated channel name or category is displayed.

6 DSC920S

Image 6
Contents DSC920S Precautions Summary of the DSC920SControls Names of the Buttons and their FunctionsDisp Band SAT Display Items SAT satellite indication Manu manual indicationOperations Scan function Switching the text displayOperations Receiving stations selected by categorySwitching the screen saver Adjusting the display contrastSS1 SS2 OFF Installation AccessoriesPower supply cord connection How to install the Control unit Installation of the Control unitInstalling location How to install the Control unit in case of using screws10 DSC920S