English | Basic Operations | ||
Adjusting the balance | |||
| |||
| 1. | Press the | |
| 2. | Turning the [ROTARY] knob clockwise em- | |
|
| phasizes the sound from the right speaker; | |
|
| turning it counterclockwise emphasizes the | |
|
| sound from the left speaker. | |
|
| ∗ The factory default setting is “BAL 0”. (Adjust- | |
|
| ment range: L13 to R13) | |
| 3. | When the adjustment is complete, press the | |
|
| ||
|
| mode is reached. |
Adjusting the fader
1.Press the [A-M] button and select “FADER 0”.
2.Turning the [ROTARY] knob clockwise em- phasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.
∗The factory default setting is “FADER 0”. (Ad- justment range: F12 to R12)
3.When the adjustment is complete, press the
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound ad- justment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗ The factory default setting is off.
1.Press and hold the
2.Press and hold the
Radio Operations
FM reception
For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Listening to the radio
1.Press the [FNC] button and select the radio mode. The frequency appears in the display.
2.Press the [BND] button and select the radio band. Each time the button is pressed, the ra- dio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press the [BND] button and select the de- sired band (FM or AM).
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tun- ing is now available.
2.Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the fre- quency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BND] button and select the de- sired band (FM or AM).
∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune into a station.
14 DXZ545MP