Clarion DXZ545MP owner manual Setting the clock, Entering titles, Clearing titles, AUX function

3.Turn the [ROTARY] knob clockwise or coun- terclockwise as needed and select from “HIGH”, “MID” or “LOW”.

4.Press the [T] button to return to the previous mode.

Setting the clock

1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “CLOCK ”.

3.Press the [ ] button.

4.Press the [a] or [d] button to select the hour or the minute.

5.Turn the [ROTARY] knob clockwise or coun- terclockwise to set the correct time.

∗ The clock is displayed in 12-hour format.

3.Press the [DISP] button and display the main.

4.Press the [T] button.

5.Press the [a] or [d] button to move the cursor.

6.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following order:

Capital letters ➜ Small letters ➜ Numbers and Symbols ➜ Umlaut ➜ Capital letters...

7.Turn the [ROTARY] knob to select the de- sired character.

8.Repeat steps 5 to 7 to enter up to 10 charac- ters for the title.

9.Press and hold the [] button for 2 sec- onds or longer to store the title into memory and cancel title input mode.

English

6.Press the [ ] button to store the time into memory.

7.Press the [T] button to return to the previous mode.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is re- set. While setting the clock, if another button or operation is selected, the clock set mode is can- celed.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be en- tered for each mode are as follows.

1.Press the [FNC] button to select the mode you want to enter a title (TUNER, CD, CD changer or TV).

2.Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to enter the title.

Clearing titles

1.Select and play a CD in the CD changer or tune in to a TV station or TUNER for which you want to clear the title.

2.Press the [DISP] button and display the main.

3.Press the [T] button.

The display switches to the title input display.

4.Press the [BND] button.

5.Press and hold the [] button for 2 sec- ond or longer to clear the title and cancel title input mode.

Triggered audio mute for cellular telephones

This unit requires special wiring to mute the au- dio signal automatically when a cellular tele- phone rings in the car.

∗This function is not compatible with all cellular tele- phones Contact your local authorized Clarion dealer for information on proper installation and compat- ibility.

AUX function

This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.