![](/images/new-backgrounds/1221304/22130417x1.webp)
5. DCP
The control panel can be detached to prevent theft. When detaching the control panel, store it in the DCP (DETACHABLE CONTROL PANEL) case to prevent scratches.
We recommend taking the DCP with you when leaving the car.
Removing the DCP
1.Press the [FNC] button for 1 second or longer to switch off the power.
2.Press in the [RELEASE] button.
[RELEASE] button
3. Remove the DCP.
DCP
Attaching the DCP
1.Insert the right side of the DCP into the Source unit.
2.Insert the left side of the DCP into the Source unit.
2.
DCP
1.
Storing the DCP in the DCP Case | English |
| |
Hold the DCP, in the orientation as shown in the |
|
figure below, and put it into the supplied DCP |
|
case. (Ensure the DCP is in the correct orienta- |
|
tion.) |
|
DCP |
|
DCP case
CAUTION
•The DCP can easily be damaged by shocks. After removing it, be careful not to drop it or subject it to strong shocks.
•When the Release button is pressed and the DCP is unlocked, the car’s vibrations may cause it to fall. To prevent damage to the DCP, always store it in its case after de- taching it. (ee figure below.)
•The connector connecting the Source unit and the DCP is an extremely important part. Be careful not to damage it by press- ing on it with fingernails, screwdrivers, etc.
DCP Rear Panel | Source Unit Front |
DCP connector
Source unit connector
Note:
•If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
DXZ545MP 9