English
Radio Mode Operations
FM Reception
For enhanced FM performance the 
® tuner includes signal actuated stereo control and Multipath noise reduction circuits.
Listening to the Radio
1)Press the FUNC button 3 to select the radio mode, then the radio will be on.
2)To select a preset band, press the BAND but- ton 4, then select one of the preset bands
such as FM1, FM2, FM3, or AM. Every time the BAND button 4 is pressed, the display will change as:
F1 (FM1) ➜ F2 (FM2) ➜ F3 (FM3) ➜ AM ➜ F1 (FM1)
3)Press the SRCH Left/Right button 2, then the station at which there is a broadcast will be selected (Seek selection).
Mute
Use this function to turn off the sound immedi- ately.
Press the MUTE button ´. The sound turns off and “MUTE” appears on the display. Press the MUTE button again to cancel the mute mode.
Manual Tuning
1)Press the BAND button 4, then select FM1, FM2, FM3 or AM.
2)Press and hold the BAND button 4 for 1 sec- ond or longer, then the display will show “MANU”, which means that a manual selec- tion function is on.
3)Press the SRCH Left/Right button 2 and select the right station.
Seek Tuning
1)Press the BAND button 4, then select FM1, FM2, FM3 or AM.
2)If the “MANU” on the display is on, press and hold the BAND button 4 for 1 second or longer. When the “MANU” display is off, the Seek Selection function is on.
3)Press the SRCH Left/Right button 2, then when it selects the station in which there is a broadcast, it automatically stops.
Preset Memory Function
Preset Memory Function can store up to 24 sta- tions: six stations for each of FM1, FM2, FM3 and AM.
Note:
•When the present memory function is used, all the content of the memory will be erased.
Manual memory function
1)Press the BAND button 4, and select the band you want to store in the memory.
2)Press the SRCH Left/Right button 2 then select the station you want to store in the memory.
3)Press and hold the Preset button @ for 2 seconds or longer, then the station will be stored in the memory.
Auto store function (Automatic Station Store)
1)Press the BAND button 4, then select the band you want to store in the memory.
2)Press and hold the AS button 5 for 2 sec- onds or longer, then the station at which the reception is the strongest will be automatical- ly stored in the memory.
Note:
•When the number of stations stored is less than six, the previous content of the memory for each direct button will be retained.
Preset Scanning (Preset Station Scan)
When the PS button 5 is pressed, the preset memory numbers flash and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the PS button 5 again to cancel the preset scanning mode.
Instant Station Recall (ISR)
With this function, a specific radio station can be recalled from any mode.
ISR memory
1)Press the FUNC button 3, then select the radio mode.
2)Select the radio station which you want to store in the memory.
3)Press and hold the ISR button # for 2 sec- onds or longer.
12 DB325