Clarion DXZ435 Operations Common to Each Mode, Adjusting the display contrast, Setting the clock

Operations Common to Each Mode

Operations Common to Each Mode

English

5.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following orders: Numbers ➜ Symbols ➜ Capital letters ➜ Numbers…

6.Turn the [ROTARY] knob to select the desired character.

7.Repeat step 4 to 6 to enter up to 30 characters for message.

8.Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message.

9.Press the [TITLE] button to return to the previous mode.

Adjusting the display contrast

You can adjust the display contrast to match the angle of installation of the unit.

∗The factory default setting is “5”. (Adjustment level:1to 8)

1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “CONTRAST”.

3.Turn the [ROTARY] knob clockwise or counterclockwise to adjust the contrast.

4.Press the [TITLE] button to return to the previous mode.

Setting the clock

1.	Press and hold the [TITLE] button for 1
	second or longer to switch to the adjustment
	selection display.
2.	Press the [a] or [d] button to select
	“CLOCK”.
3.	Press the [	] button.
4.	Press the [a] or [d] button to select the
	hour or the minute.
5.	Turn the [ROTARY] knob clockwise or
	counterclockwise to set the correct time.
	∗ The clock is displayed in 12-hour format.
6.	Press the [	] button to store the time into
	memory.

6.Press the [DISP] button to select a character. Each time you press the [DISP] button, the character changes in the following order: Numbers ➜ Symbols ➜ Capital letters ➜ Numbers...

7.Turn the [ROTARY] knob to select the desired character.

8.Repeat steps 5 to 7 to enter up to 8 characters for the title.

9.Press and hold the [ ] button for 2 seconds or longer to store the title into memory and cancel title input mode.

Clearing titles

English

Setting the method for title scroll

Set how to scroll in CD-TEXT or MD.

Setting LOW PASS FILTER

This function allows you to set the low-pass filter

7. Press the [TITLE] button to return to the

previous mode.

Note:

1.Select and play a CD in the CD changer or tune in to a TV station for which you want to clear the title.

∗The factory default setting is “ON”.

1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “SCROLL”.

3.Turn the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.

●ON:

To scroll automatically.

●OFF:

To scroll just 1 time when the title was changed or the title key was pressed.

4.Press the [TITLE] button to return to the previous mode.

Dimmer control

You can set the dimmer control on or off.

∗The factory default setting is “ON”.

1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “DIMMER”.

3.Turn the [ROTARY] knob clockwise to “ON” or counterclockwise to “OFF”.

4.Press the [TITLE] button to return to the previous mode.

sub-woofer output.

∗The factory default setting is “LPF 120”.

1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “SW LPF”.

3.Turn the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turn the [ROTARY] knob, the setting changes in the following order:

REAR ➜ LPF 50 ➜ LPF 80 ➜ LPF 120

4.Press the [TITLE] button to return to the previous mode.

Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

1.Press and hold the [TITLE] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select “AUX SENS”.

3.Turn the [ROTARY] knob clockwise or counterclockwise as needed and select from “HIGH”, “MID” or “LOW”.

4.Press the [TITLE] button to return to the previous mode.

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

Entering titles

Titles up to 8 characters long can be stored in memory and displayed for CD, CD changer and TV stations. The number of titles that can be entered for each mode are as follows.

Mode	Number of titles
CD mode	50 titles
TV mode	20 titles
CD changer mode	Number of titles
DCZ625 connected	100 titles
CDC655Tz connected	100 titles
CDC1255z connected	50 titles

1.Press the [FNC] button to select the mode you want to enter a title (CD, CD changer or TV).

2.Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title.

3.Press the [DISP] button and display the sub.

4.Press the [TITLE] button. The cursor position flashes.

5.Press the [a] or [d] button to move the cursor.

2.Press the [DISP] button and display the sub.

3.Press the [TITLE] button.

The display switches to the title input display.

4.Press the [BND] button.

5.Press and hold the [ ] button for 2 seconds or longer to clear the title and cancel title input mode.

AUX function

This system has an external input jack so you can listen to sounds and music from external devices connected to this unit.

18 DXZ435 DXZ435 19