Clarion DXZ435 owner manual Basic Operations

Page 7

7. OPERATIONS

Basic Operations

English

Basic Operations

Note: Be sure to read this chapter referring to the front diagrams of

chapter “3. CONTROLS” on page 5 (unfold).

“Z+ OFF” “B-BOOST” “IMPACT”

“EXCITE” “CUSTOM” “Z+ OFF” ...

B-BOOST

: bass emphasized

The factory default setting is “B<Q 1>”.

(Adjustment 1/1.25/1.5/2)

5. When the adjustment is complete, press the

[A-M] button several times until the function

English

CAUTION

Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Adjusting the volume

Turning the [ROTARY] knob clockwise increases the volume; turning it counterclockwise decreases the volume.

The volume level is from 0 (minimum) to 33 (maximum).

Switching the display

• IMPACT

: bass and treble

 

emphasized

• EXCITE

: bass and treble

 

emphasized mid de-

 

emphasized

• CUSTOM

: user custom

• Z+ OFF

: no sound effect

mode is reached.

Adjusting the treble (Gain, Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1. Press the [A-M] button and select “TREBLE”.

Turning on/off the power

Note:

Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FNC] button for 1 second or longer to turn off the power for the unit.

Note:

System check

The first time this unit is turned on after the wire connections are completed, it must be checked what equipment is connected. When the power is turned on, “SYSTEM” and “PUSH PWR” appear in the display alternately, so press the [FNC] button. The system check starts within the unit. When the system check is complete, press the [FNC] button again.

Selecting a mode

1.Press the [FNC] button to change the operation mode.

2.Each time you press the [FNC] button, the operation mode changes in the following order:

Radio mode CD mode CD changer mode MD changer mode DVD changer mode TV mode AUX mode Radio mode...

External equipment not connected with CeNET is not displayed.

Press the [DISP] button to select the desired display.

Each time you press the [DISP] button, the display switches in the following order:

Main display

Sub display

Clock display

Main display

Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display several seconds after the adjustment.

When you have entered a title in a CD, it appears in the sub display. If you have not entered a title, “NO TITLE” appears in the title display instead. For information on how to enter a title, refer to the subsection “Entering titles” in section “Operations Common to Each Mode”.

Setting the Z-Enhancer Plus

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

The factory default setting is “Z+ OFF”.

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

When “B-BOOST” is set

“B-BOOST” “BAL 0” “FAD 0” Last function mode.

When “IMPACT” is set

“IMPACT” “BAL 0” “FAD 0” Last function mode.

When “EXCITE” is set

“EXCITE” “BAL 0” “FAD 0” Last function mode.

When “CUSTOM” is set

“BASS” “TREBLE” “BAL 0” “FAD 0” Last function mode.

When “Z+ OFF” is set

“BAL 0” “FAD 0” Last function mode.

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.

Press the [A-M] button and select “BASS”.

2.

Turning the [ROTARY] knob clockwise

 

emphasizes the bass; turning it

 

counterclockwise attenuates the bass.

 

The factory default setting is “B<G 0>”.

 

(Adjustment range: –6 to +6)

3.

Press the [d] or [a] button to select “B<F

 

60>”.

 

Turninng the [ROTARY] knob clockwise or

 

counterclockwise to select the frequency.

 

The factory default setting is “B<F 60>”.

 

(Adjustment 60/100/200 Hz)

4.

Press the [d] or [a] button to select “B<Q 1>”.

2.Turning the [ROTARY] knob clockwise emphasizes the treble; turning it counterclockwise attenuates the treble.

The factory default setting is “T<G 0>”. (Adjustment range: –6 to +6)

3.Press the [d] or [a] button to select “T<F 10>”.

Turninng the [ROTARY] knob clockwise or counterclockwise to select the frequency.

The factory default setting is “T<F 10>”. (Adjustment 10 kHz/15 kHz)

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BAL 0”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

The factory default setting is “BAL 0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.

Press the [A-M] button and select “FAD 0”.

2.

Turning the [ROTARY] knob clockwise

 

emphasizes the sound from the front

 

speakers; turning it counterclockwise

 

emphasizes the sound from the rear

 

speakers.

 

The factory default setting is “FAD 0”.

 

(Adjustment range: F12 to R12)

3.

When the adjustment is complete, press the

 

[A-M] button several times until the function

Each time you press the [Z+] button, the tone effect changes in the following order:

Turninng the [ROTARY] knob clockwise or

counterclockwise to select the Q-curve.

mode is reached.

12

DXZ435

DXZ435

13

Image 7
Contents PE-2557K Features ContentsHandling Compact Discs Display ItemsLCD Screen BND Controls NomenclatureRotary Release FNCRemove the DCP Removing the DCPAttaching the DCP Storing the DCP in the DCP CaseDual Zone Remote ControlRPT Basic Operations OperationsRadio Operations CD Operations Operations Common to Each ModeSetting the method for title scroll Operations Common to Each ModeAdjusting the display contrast Setting the clockCD/MD Changer Operations Operations of AccessoriesWatching a video Setting the TV diverTV Operations Watching a TVDCP Case of DifficultySpecifications
Related manuals
Manual 76 pages 63.46 Kb

DXZ435 specifications

The Clarion DXZ435 is a versatile and feature-rich car audio receiver designed for those who seek an exceptional listening experience on the road. This model stands out for its robust sound quality, user-friendly interface, and a plethora of connectivity options, making it an ideal choice for music enthusiasts.

One of the main features of the DXZ435 is its powerful audio performance. It boasts a built-in MOSFET amplifier that delivers clear and dynamic sound across various music genres. The unit offers a standard output power of 4x50 watts, ensuring that even at higher volumes, the audio remains crisp and distortion-free. Users can further enhance their listening experience through the integration of digital signal processing, allowing for customization of sound settings to suit personal preferences.

The DXZ435 comes equipped with a CD player, enabling the playback of CDs, CD-Rs, and CD-RWs. Beyond traditional media, it also features an AM/FM tuner with preset options, providing access to various radio stations. For those who prefer digital music sources, this receiver includes a USB port, allowing for direct connection with portable media devices. Additionally, it supports MP3, WMA, and AAC file formats, ensuring compatibility with a wide range of audio files.

In terms of connectivity, the Clarion DXZ435 is designed with convenience in mind. It features an auxiliary input that enables the connection of external devices, such as smartphones or tablets, for streaming music directly through the receiver. This flexibility extends to Bluetooth compatibility, allowing users to wirelessly connect their devices for hands-free calling and audio streaming, enhancing both safety and convenience while driving.

The user interface of the DXZ435 is intuitive, with a bright and easy-to-read display. It features customizable button illumination that can match the dashboard lighting, allowing for a cohesive look. The rotary knob and on-screen menus make it easy to navigate through various settings and options, enhancing the overall user experience.

In summary, the Clarion DXZ435 is a well-rounded car audio receiver that provides exceptional sound quality, versatile media playback options, and seamless connectivity for the modern driver. Its combination of performance and user-friendly features makes it a compelling choice for anyone looking to upgrade their car audio system.