1.Press the [Z+] button and select the Z- Enhancer Plus mode to adjust.
2.Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.
●When “B-BST 0” is selected, you can ad- just the bass in the range of –3 to 3.
●When “IMPACT 0” is selected, you can adjust the bass and treble in the range of –3 to 3.
●When “EXCITE 0” is selected, you can ad- just the bass and treble in the range of –3 to 3.
∗ Press and hold the [Z+] button for 2 seconds |
or longer to change to the “CUSTOM” mode. |
Bass/treble characteristics become flat and |
the indication “Z+FLAT” is shown in the |
display. |
Press the [Z+] button again to change to the |
“Z+ OFF” mode. |
For enhanced FM performance the
® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Listening to the radio
1.Press the [FNC] button and select the radio mode. The frequency or PS appears in the display.
∗ PS: Programme service name
2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the [a] or [d] button to tune in the desired station.
Tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.
1.Press the [BND] button and select the desired band (FM or AM).
∗If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune in a station.
●Quick tuning:
Press and hold the [a] or [d] button for 1 second or longer to tune in a station.
●Step tuning:
Press the [a] or [d] button to manually tune in a station.
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press the [BND] button and select the desired band (FM or AM).
2.Press and hold the [P/A] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.
1. Press the [P/A] button.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
∗ The factory default setting is off.
1.Press and hold the [A-M] button for 1 second or longer to turn on the MAGNA BASS EXTEND effect. “M-B EX” lights in the display.
2.Press and hold the [A-M] button for 1 second or longer to turn off the MAGNA BASS EXTEND effect. “M-B EX” goes off from the display.
Adjusting the subwoofer
When you default select one of mode (LPF50, LPF80, LPF120).
| ∗ The factory default setting is “S-VOL 0”. |
| (Adjustment range: –6 to +6) |
1. | Press the [SW-VOL] button to select the |
| subwoofer volume increases or decreases. |
2. | Press and hold the [SW-VOL] button, the |
| subwoofer volume automatically increases or |
| decreases. |
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press the [BND] button and select the desired band (FM or AM).
∗If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the [a] or [d] button to automatically seek a station.
When the [d] button is pressed, the station is sought in the direction of higher frequencies; if the [a] button is pressed, the station is sought in the direction of lower frequencies.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) exist to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically.
1.Press the [BND] button and select the desired band (FM or AM).
2.Press the corresponding [DIRECT] button to recall the stored station.
∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.
Manual memory
1.Select the desired station with seek tuning, manual tuning or preset tuning.
2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.
2.When a desired station is tuned in, press the [P/A] button again to continue receiving that station.
Note:
•Be careful not to press and hold the [P/A] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.
Instant station recall (ISR)
Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.
●ISR memory
1.Select the station that you wish to store in ISR memory.
2.Press and hold the [ISR] button for 2 seconds or longer.
●Recalling a station with ISR
In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode.
