Wayne-Dalton 46 installation instructions Door Section Identification, Package Contents Continued

	Package Contents Continued...
(2) 3/8”- 16	1/4”- 20 HEX NUTs	1/4”- 20 Flanged Hex	(2) #10 Phillips	1/4”- 14 x 5/8” Self Tapping		(2) 1/4”- 20 X 5/8”
Hex Nuts	(lift handle)	Nuts (as required)	head screws	Screws (as required)		TAMPER-resistant
						SCREWs
1/4”- 20 x 5/8”	1/4”- 20 x 7/8” Self Drilling		(2) 3/8”- 16 x 3/4”		5/16” X 2” HEX head LAG screws
Carriage Bolts	Screws (as required)		hex head bolts		(as required)
(as required)
1/4”-20 x 11/16” Self Drilling		(2) 1/4” x 2-1/2” carriage bolts (lift handle)			(2) #8 x 1-5/8” self tapping screws
						(STEP PLATE)
Screws (as required)

	Door Section Identification
Tools Needed:	The bottom section can be		Top Section
	identified by the factory attached
	bottom astragal and the bottom bracket
	warning labels on each end stile. This
	section is always the 1st section on
	four and five section doors.
	The lock section may have a yellow	Intermediate ii Section (5 section doors only)
	and black warning label on the right
	side of the section. This section is		warning label
	always the 2nd section on four and five
	section doors.
	The intermediate i section may		Intermediate i Section
	have a warning label attached to either
	right or left hand endstile of the section.
	This section is always the 3rd section
	from the bottom of the door.
	The intermediate ii section is		Lock Section
	always the 4th section on five section
	door.
	The Top section is always the 4th		Bottom Bracket
			warning Labels
	section on four section door and the 5th
	section on five section door.		Bottom Section
		astragal

4

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com