26 | Attaching Disconnect Cables |
Tools Needed: | NOTE: See idrive® main installation and |
Pliers | owners manual for idrive® parts. |
| |
| Attach the loose disconnect cable |
| (located in opener hardware bag) to the |
| opener with the “S” hook. Close both |
| ends of the “S” hook to lock assembly |
| together with pliers. |
| Thread the disconnect cable (behind the |
| counterbalance cable) through the hole |
| in the right hand end bracket, and |
| remove all slack between opener and |
| right end bracket. |
Disconnect
Cable
Hole in Right
End Bracket
Right Side of
End Bracket
Hole in | Close “S” Hook |
End Bracket
INSTALLATION
27 | Mounting Disconnect | |
Handle Bracket | ||
Tools Needed: | NOTE: See idrive® main installation and | |
Pencil | owners manual for idrive® parts. | |
| ||
Tape Measure | Mark a location on the right jamb, 6 | |
feet above the floor to mount the | ||
| ||
1/8” Drill Bit | disconnect handle bracket. | |
7/16” Socket | Drill 1/8” pilot holes for the lag screws. | |
Driver |
| |
Power Drill | Align top of the bracket with the mark. | |
Fasten bracket to the jamb with | ||
| (2) 1/4” x |
6ft
(2) 1/4 x
Disconnect
Handle Bracket
27
Please Do Not Return This Product To The Store. Contact your local
local yellow pages/business listings or go to the Find a Dealer section online at