Clarion Explore Specifications for Optimal Performance in Car Amplifiers

APX_DPX Amps.qxd 2/6/2008 11:53 AM Page 24

English

8. SPECIFICATIONS

Note:

The technical data and the design of the equipment may change without prior notice for the sake of technical improvements.

APX Amplifiers

Parameter	APX4361	APX2181
Maximum power output	170W x 4	170W x 2
Continuous rated power	90W x 4	90W x 2
Typical power in bridged mode	320W x 2	320W x 1
Typical power in 2-Ohm load	160W x 4	150W x 2
THD (1KHz, 10W, 4 Ohms)	0.05%	0.05%
IM distortion	0.08%	0.08%
S/N (A-weighted)	86dB	86dB
Floor noise	2mV	2mV
Channel separation	70dB	70dB
Frequency response	10Hz to 50kHz	10Hz to 50kHz
Line level input sensitivity	200mV to 8 Volts	200mV to 8 Volts
Speaker level input sensitivity	600mV to 20 Volts	600mV to 20 Volts
Input impedance	33K Ohms	33K Ohms
Allowable battery voltage	10.5 to 16.5 Volts	10.8 to 16.5 Volts
Size	12-1/4"x10-1/8"x2-3/8”	10"x10-1/8"x2-3/8"

These specications are Amplier Power Standard CEA-2006 Compliant.

24