Panasonic Complete Guide to the TY-WK3L2RW Wall Bracket for TVs

Page 3

Attaching / removing the pedestal

Wall-hanging bracket (Optional)

Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Assembly

Assembly

Bracket

Base

screw (4)

screw (4)

TBL5ZA33121

TBL5ZX04881

(black)

(black)

 

 

1 Assembling the pedestal

A

 

Use the assembly screws to fasten the

C

bracket to the base securely.

Make sure that the screws are securely

tightened.

Front

For additional details, please read the manual of the optional accessories.

TY-WK3L2RW

The angle of wall-hanging bracket can be adjusted in “zero tilting (vertical)” and “5 or 10-degree tilting” for this TV.

 

 

 

 

 

 

Depth of screw:

 

 

 

 

 

 

minimum 11 mm

Rear of the TV

 

 

maximum 17 mm

 

 

 

 

 

 

 

Do not use the pedestal if it becomes warped or physically damaged.

Forcing the assembly screws the wrong way

 

will strip the threads.

D

200 mm

Screw Thread Type: M4

If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.

If insufficient care is taken to ensure screws

are properly tightened during assembly,

2 Securing the TV

Use the assembly screws to

fasten securely.

Tighten the four assembly

screws loosely at first, then

tighten them firmly to fix

securely.

Arrow mark

Holes for wall-hanging bracket installation

Screw for fixing the TV onto the wall-hanging bracket (not supplied with the TV)

[View from the side]

the pedestal will not be strong enough to

support the TV, and it might fall over and

become damaged, and personal injury may

result.

Ensure that the TV does not fall over.

Carry out the work on a

horizontal and level surface.

Hole for pedestal

B

installation

 

WARNING

Failure to use a Panasonic bracket or choosing to mount

the unit yourself will be done at the risk of the consumer.

Always be sure to ask a qualified technician to carry out

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may result.

Two or more people are required to install and remove the TV.

If two or more people are not present, the TV may be dropped, and personal injury may result.

Preventing the TV from falling over

Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the installation surface.

The place where the pedestal is to be fixed should be thick enough and made of hard material.

Screw hole

Screw (not supplied) Diameter: 3 mm Length: 25 - 30 mm

set up. Incorrect fitting may cause equipment to fall,

resulting in injury and product damage. Any damage

resulting from not having a professional installer mount

your unit will void your warranty.

When any optional accessories or wall hanging brackets

are used, always ensure that the instructions provided are

followed fully.

Do not mount the unit directly below ceiling lights (such

as spotlights or halogen lights) which typically give off

high heat. Doing so may warp or damage plastic cabinet

When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified procedure. (p. 3)

Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.

1 Remove the assembly screws from the TV.

2 Pull out the pedestal from the TV.

3 Remove the assembly screw from the bracket.

parts.

Take care when fixing wall brackets to the wall. Wall

mounted equipment shall not be grounded by metal

within the wall. Always ensure that there are no electrical

cables or pipes in the wall before hanging bracket.

To prevent fall and injury, remove the TV from its fixed

wall position when it is no longer in use.

3

TH-L32XM5KMTX_fold_EN.indd 3

6/1/2012 8:26:07 AM

Image 3
Contents Operating Instructions Safety Precautions Securing the TV Attaching / removing the pedestalWall-hanging bracket Optional Assembling the pedestalConnecting the Aerial & External Equipment Inserting and removing remote’s batteries Identifying ControlsWatching TV Performing Initial SetupTo return to TV Using the Menu FunctionsWatching External Inputs Navigating the MenuMode Basic sound mode Music / Speech / User List of Menu ItemsDigital / Analogue System Menu PC SetupTuning Menu English IndonesiaInput Labels Tuning and Editing ChannelsAuto Tuning using the buttons on the TV Control channel audience Child LockUsing Media Player Photo modeStarting Media Player Change the contents Hdmi connection Music mode How to operate playback Technical InformationInput signal that can be displayed PC connectionMedia Player Stereo / Bilingual Sound Selection FAQsSpecifications LicenseWeb Site http//panasonic.net