Performing Initial Setup
These steps are not necessary if the setup has been completed by your local dealer.
1Connect the mains lead, plug into a wall outlet and switch on the TV
Insert the mains plug (supplied) firmly into place.
•When disconnecting the
mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
•After switching on the mains power, you can also use the remote control to turn on the TV.
2 Select your language
OSD Language
English
Select
OK
Store
3 Select your area
Channel Plan
Asia/W.Europe
CIS/E.Europe
China
Hong Kong
NZ/Indonesia
CATV/Other1
Select
4 | Start Auto Tuning |
|
| ||
Auto Tuning |
|
|
| ||
|
| 1 |
|
| CH2 |
|
|
|
|
|
|
|
| Scan | 0% |
| 100% |
•Auto Tuning searches and stores TV channels. The sorted channel order depends on the TV signal, the broadcasting system and reception conditions.
5 Select [Home]
Please select your viewing environment.
HomeShop
Viewing Environment Mode
OK Select
Confirm
Auto Tuning is completed.
Viewing Environment Mode
[Home] : Recommended mode for home viewing at optimal picture / power consumption. [Viewing Mode] is [Normal] (p. 8).
[Shop] : Features demonstration mode for
To return to viewing environment selection mode if you have selected [Shop]
Shop
RETURN
You have selected shop mode
Please select your viewing environment.
Watching TV
1 | Turn on the TV | POWER |
| ||
2 | Select TV mode | TV |
|
|
3Select a channel
Identifying Controls (p. 5)
While watching the TV, you can do the following:
Freeze / unfreeze the picture
STILL
Set the Off Timer
The TV automatically goes into Standby after the selected period.
OFF TIMER Press repeatedly until the desired time appears.
[0/15/30/45/60/75/90](minutes)
•Also possible to set the time from [Off timer] in the Setup Menu (p. 9).
•To cancel, set to [0] or turn off the TV.
•To display the remaining time Information banner (below)
•When the remaining time is within 3 minutes, the remaining time will flash on screen.
Display options for the current programme
OPTION | Select |
OK
Adjust
[Channel Colour Set]
Sets colour density
[Picture Menu] (p. 8)
Return to the last viewed channel
• Press again to return to the present
LAST VIEW | view. |
|
Change aspect ratio
ASPECT
Do one of the following:
•Press repeatedly until you reach the desired mode
[16:9/14:9/Just/4:3/4:3 Full/Zoom1/ Zoom2/Zoom3]
•Select from [Aspect Selection] list
Aspect Selection | Select |
16:9 | OK |
14:9 | Change |
Just |
4:3 4:3 Full Zoom1 Zoom2 Zoom3
–Only [16:9] and [4:3] are available in PC input mode.
–Aspect is fixed to [16:9] when [Viewing Mode] is set to [GAME].
–Aspect mode can be memorised separately for each SD (Standard definition) and HD (High definition) signals.
–HDMI mode:
HD signals: 16:9, 14:9, 4:3, 4:3 Full, Zoom1, Zoom2, Zoom3
SD signals: 16:9, 14:9, Just, 4:3, Zoom1,
Zoom2, Zoom3
Display Information banner
INFO • Also appears when changing channel
OK
Start Auto Tuning
1 When selecting [CATV/Other], press OK, and then select the Channel Plan from [Indian CATV], [South Africa],
HomeShop
•To change the viewing environment mode later, reset all settings by accessing [Shipping Condition] (p. 9).
[MPX]
Selects multiplex sound (if available)
[Sound Menu] (p. 8)
[Volume Correction]
Adjusts the volume of an individual
TV |
1 |
CH7 |
5.5MHz |
PAL |
16:9 |
15 |
Sound mute On/ Audio mode/Off Timer remaining time
[American System], [American CATV] or [Japan].
channel or input mode
[Sound Menu] (p. 8)
6
Input mode/Channel position/Channel number/Sound system/Colour system (not displayed if set to [Auto])/Aspect ratio
6/1/2012 8:26:09 AM