List of Menu Items
Picture Menu- Settings for picture
•You can customise the settings of [Backlight], [Contrast], [Brightness], [Colour], [Sharpness], [Tint], [Colour Balance], [Eco Mode],
•Set for each input signal.
Viewing Mode 
Basic picture mode
[Dynamic / Normal / Cinema / True Cinema / GAME] [Dynamic]: Enhanced picture contrast and sharpness. [Normal]: Suitable for normal ambient lighting conditions.
[Cinema]: Improved performance of contrast, black and colour reproduction.
[True Cinema]: Precisely reproduces the original quality of the image without any adjustment.
[GAME]: Fast response signal, specifically to provide suitable images for playing games.
•[GAME] is not valid in TV mode.
•A record of accumulated time spent in [GAME] can be displayed on the screen
[Playing Time Display] (p. 9)
Backlight Contrast Brightness Colour Sharpness
Increases or decreases the levels of these options according to your personal preference
Tint 
Adjusts the picture hue.
•For NTSC signal, Component or HDMI input
Colour Balance 
Sets the overall colour tone of the picture [Cool / Normal / Warm]
•Not valid when [Viewing Mode] is set to [True Cinema].
Channel Colour Set 
Colour density variation among broadcast channels can be adjusted to three levels for each reception channel.
•Select the channel you want to adjust and set.
Eco Mode 
When turned on, C.A.T.S. sensor
(p. 5) senses the surrounding light level to adjust the screen brightness appropriately to reduce the power consumption [Off / On]
•Not available in Shop mode (Dynamic picture mode)
PNR (Picture Noise Reduction) 
Automatically reduces unwanted picture and flicker noise in the contoured parts of a picture [Off / Min / Mid / Max]
•Not valid on PC signal.
Makes still or slow moving pictures look
more vivid [Off / On]
•Occasionally, while viewing still or slow moving pictures, colour patterning may be seen. Set to [On] to display sharper and more accurate colours.
•For PAL or NTSC signal reception only.
•Not valid on Component, PC, HDMI and Media Player.
Advanced PC Settings 
Available in PC input mode
only.
[Gamma]: Switches the gamma curve [2.0 / 2.2 / 2.5] These values are only reference for adjustment.
[Reset to Defaults]: Press OK to reset to the default
Reset to Defaults 
Press OK to reset the present picture [Viewing Mode] of the selected input to the default settings.
Sound Menu - Settings for sound
Mode 
Basic sound mode [Music / Speech / User]
•The selected mode affects all input signals.
[Music]: Improves sound quality for watching music videos, etc.
[Speech]: Improves sound quality for watching news, drama, etc.
•In [Music] and [Speech] modes, you can adjust and store [Bass] and [Treble] settings for each mode individually.
[User]: Adjusts sound using the [Equaliser].
•For the [User] mode, [Equaliser] will appear on the Sound
Menu instead of [Bass] and [Treble]. Select [Equaliser] and adjust the frequency
[Equaliser] (below).
Bass 
Increases or decreases the level to enhance or minimise lower, deeper sound output.
Treble 
Increases or decreases the level to enhance or minimise sharper, higher sound output.
8
Equaliser 
Select the frequency band with the left / right cursor button and change the frequency level with the up / down cursor button.
•This function is available when [Mode] is set to [User].
•If you want to enhance the bass sound, raise the level of the lower frequency. If you want to enhance the treble sound, raise the level of the higher frequency.
•To reset the levels of each frequency to the default settings, select [Reset to Defaults] using the left / right cursor button, and then press OK.
Balance 
Adjusts the volume level of the right and left
speakers.
Surround 
Surround sound settings [Off / On]
•Switching is also possible by pressing Surround (p. 5).
Auto Gain Control 
Adjusts the current volume level if it is extremely different from the previous viewed channel or input mode [Off / On]
Volume Correction 
Adjusts the volume of individual channel or input mode
Speaker Distance to Wall 
Adjusts the low frequency sound [Over 30cm / Up to 30cm]
•If the space between the back of TV and wall is over 30 cm, [Over 30cm] is recommended.
•If the space between the back of TV and wall is within 30 cm, [Up to 30cm] is recommended.
MPX 
Select multiplex sound mode (if available)
[Stereo / Mono / M1 / M2] [Stereo]: Use this normally.
[Mono]: When stereo signal cannot be received.
[M1] / [M2]: Available while mono signal is transmitted.
HDMI Input 
Select to fit the input signal
[Digital / Analogue]
[Digital]: HDMI cable connection
[Analogue]:
•HDMI input mode only.
Reset to Defaults 
Press OK to reset the present settings of [Mode], [Balance] and [Surround] to the default.
6/1/2012 8:26:11 AM