Setup Menu- Settings for TV
PC Setup
[Input Resolution] Switches to a wide view
•VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•Options change depending on signals.
[Clock] Set to the minimum level if noise occurs.
OK
OK
[Clock Phase] Eliminates flicker and distortion.
•Adjust after [Clock] adjustment.
•Set to the minimum level if noise occurs.
[Sync] PC sync signal type [H & V / On Green]
–[H & V]: By the horizontal and vertical signals from your PC.
–[On Green]: Sync on Green sync from your PC.
[Reset to Defaults] Press OK to reset the [PC Setup] settings to the default. Off Timer Set the time the TV automatically goes to Standby mode
[Off / 15 / 30 / 45 / 60 / 75 / 90 minutes]
Child Lock Locks a channel / AV input to prevent access to it (p. 10).
Tuning Menu
[Channel List Edit] Skip the unwanted channels or edit channels (p. 10). [Auto Tuning] Set TV channels automatically (p. 10)
[Manual Tuning] Set TV channels manually (p. 10)
OSD Language Changes language for
[English / | / | / | / | / Indonesia / | / | / | ] |
|
|
|
|
|
|
| |
Display Settings |
|
|
|
|
|
|
[Input Labels] Label or skip each input terminal (p. 10)
[Banner Display Timeout] Set how long the information banner stays on screen [0 (No display)] / [1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 seconds] (p. 6)
[Playing Time Display] [Off / On]
•Set to [On] to display a record of accumulated time spent using [GAME] mode every 30 minutes
•This function is available when [GAME] is selected in [Viewing Mode].
System Menu
[Shipping Condition] Resets all settings to the original condition.
•Press OK to confirm, then follow the
•Initial setup will automatically start when the TV is next turned on (p. 6).
[Software Licence] Displays the software licence information. [System Information] Displays the system information of this TV.
Selects optimum colour system based on video signals in AV mode [Auto / PAL / SECAM / M.NTSC / NTSC]
[Colour Matrix] Adjusts suitable colour parameters for [SD] (standard definition) or [HD] (high definition)
–[SD]: Input signal is a normal TV system
–[HD]: Input signal is a high definition system
•Available only with 480p or 576p input on video signals in a natural colour from digital equipment connected to Component or HDMI terminal.
[Auto Standby] Set the time the TV automatically goes to Standby mode when no operation is performed in the selected period [Off] / [2 / 4 hours]
•Automatic input switching with the connected equipment affects this function and time- count will be reset.
•The notification message will flash 3 minutes before going to Standby mode.
[Power Save] Reduces brightness of the picture to economise on power consumption [Off / On]
[16:9 Overscan]
–[Off]: Displays image in its original size including edge video noise such as lines, dashes, dots, etc.
–[On]: Default - Image is overscanned by ~5% beyond the edge of the screen to hide edge video noise
•Applicable for video signals when the TV aspect is set to [16:9].
•Memorised separately for SD and HD channels/signals.
9
6/1/2012 8:26:11 AM