Remote control, Apple device compatibility

Remote control

The 550A and 650A are supplied with an Azur Navigator remote control that operates both this ampliﬁer and Cambridge Audio Azur range CD players. Insert the supplied AAA batteries to activate. The functions relevant to the ampliﬁer are as follows:

Standby/On

Switches the ampliﬁer between On and Standby mode.

Source

Cycles through the ampliﬁer’s source inputs.

Mute

Mutes the audio on the ampliﬁer. The mute mode is indicated by the source LED ﬂashing. Press again to cancel mute.

Note: The speaker outputs, Pre-out and headphone outputs will all be muted. The Record outputs are unaffected.

Speaker A/B

Toggles the speaker terminals on the rear panel to output speaker A only, speaker B only, both speakers A and B or no speaker output at all. The speaker indicators on the front panel of the ampliﬁer show which speaker terminals are selected.

Note: The ‘no speaker output’ option allows the 550A/650A to be used as a preampliﬁer only.

Volume controls

Increases or decreases the volume of the ampliﬁer output.

, , , , ,

The six source select buttons are used to directly select the input source to the ampliﬁer.

The remaining buttons are reserved for use with Cambridge Audio Azur CD players.

azur 550A/650A

Apple device compatibility

The Azur 550AC/650AC Navigator remote control can control the basic functions of Apple devices such as Apple TV and Apple’s iPod/iPhone/iPad range when docked in a Cambridge Audio or Apple dock.

Press and hold the source button that corresponds to the input that the Apple product is connected to whilst also pressing one of the buttons below.

The functions are slightly different depending on the Apple product.

Select

Play/pause

Stop or Menu

Press brieﬂy to skip or navigate left or right. Press and hold to scan forwards or backwards.

Used to control volume and/or navigate menus.

Used to navigate menus.

In addition, the Azur remote can be paired with up to six speciﬁc Apple devices using any of the six source buttons. This can be useful if you have more than one Apple product.

For more information on pairing refer to your Apple device’s instruction manual.

Pairing – To pair with an Apple device, press and hold the required source button along with the button for six seconds. Some devices like Apple TV have visual indication once pairing is achieved.

Un-pairing– To un-pair an Apple device, press and hold any of the source buttons along with the button for six seconds.

Custom installation (C.I.) use

The 550A and 650A feature a Control Bus input/output that allow un- modulated remote control commands (positive logic, TTL level) to be received electrically by the unit and looped to another unit if desired. These control commands are typically generated by custom installation (multi-room) systems or remote IR receiver systems. The Control Bus sockets are colour-coded orange.

An IR Emitter Input is also provided that allows modulated IR remote control commands to be received electrically by the unit. Commands on this input operate the unit only and are not looped out demodulated on the Control Bus Output.

In addition the units feature 'direct' IR/Control codes as well as toggle codes for some of their features to simplify programming custom installation systems. Special direct On/Off and Mute commands can be accessed on the supplied remote control for teaching into C.I. systems as follows:

1.Press and hold the Standby button. The remote ﬁrst generates its standby (toggle) command. Keep holding the button down and after 12 seconds an ampliﬁer “On” command will be generated. If the button is held down for a further 12 seconds, an ampliﬁer “Off” command is generated.

2.Press and hold the Mute button. The remote ﬁrst generates its mute (toggle) command. Keep holding the button down and after 12 seconds a “Mute On” command will be generated. If the button is held down for a further 12 seconds, a “Mute Off” command is generated.

A full code table for this product is available on the Cambridge Audio website at www.cambridge-audio.com.

ENGLISH

550A, 650A specifications

Cambridge Audio, a revered name in the audio industry, is renowned for producing high-quality amplification solutions. Among its distinguished lineup, the 650A and 550A integrated amplifiers stand out for their exceptional performance and innovative features, making them favorites for both audiophiles and casual listeners.

The Cambridge Audio 650A amplifier is designed to deliver powerful and precise sound, harnessing a robust 75 watts per channel into 8 ohms. This amplifier features an advanced toroidal transformer, which enhances efficiency and reduces electromagnetic interference, ultimately providing cleaner audio. The 650A employs Cambridge's proprietary Class A/B amplifier technology, ensuring a rich and warm sound signature that appeals to lovers of diverse music genres. Additionally, the inclusion of a high-quality headphone output allows for a private listening experience with minimal signal degradation.

In contrast, the 550A model offers a more straightforward approach while still maintaining impressive audio fidelity. Delivering 50 watts per channel into 8 ohms, the 550A is perfect for smaller setups or compact spaces. Its Simple and elegant design hides sophisticated technologies aimed at achieving high-performance output. The amplifier features a high-quality pre-amp section, making it versatile enough to accommodate various audio sources, including vinyl players, CD players, and digital streaming devices.

Both amplifiers feature a solid metal chassis that minimizes vibrations, preserving sound integrity. They also come equipped with multiple inputs, allowing users to connect different sources easily. The 650A and 550A include tone controls to customize the sound signature according to personal preferences, and discrete circuit design to enhance signal clarity further.

Additionally, both amplifiers showcase Cambridge Audio's commitment to user-friendly design principles. With intuitive controls and a clear display, users can enjoy a hassle-free experience, whether adjusting settings or switching sources.

In conclusion, the Cambridge Audio 650A and 550A integrated amplifiers exemplify the brand's dedication to high-quality audio performance. With advanced technologies, robust power, and versatile connectivity, these amplifiers cater to a broad range of listening preferences and environments, ensuring that music is experienced as the artist intended. Whether opt for the powerful 650A or the conveniently efficient 550A, users can expect an unparalleled audio experience that elevates their musical journey.