Using the System
Wall mounting the SoundTouch™ controller
WARNING: The wall mount bracket contains magnetic material. Please contact your physician if you have any questions whether this might affect the operation of your implantable medical device.
Follow these instructions to wall mount your SoundTouch™ controller. Use the bracket as a template to mark the holes.
Tab
Bracket
Wallboard (anchors and screws supplied):
1.Use a ³/16 in. (5 mm) drill bit to drill two holes into ³/8 in. (9.5 mm) or thicker wallboard.
2.Insert the provided anchors into the holes and tap lightly to secure.
3.Align the bracket (tab at top) to the anchors. Tighten the provided screws into the holes.
4.Align the latch to the bracket's tab. Attach the controller.
Wood:
1.Purchase two #6x1 in. (25.4 mm)
2.Use a 7/64 in. (2.78 mm) drill bit to drill 2 holes into ³/4 in. (19 mm) or thicker wood.
3.Align the bracket (tab at top) to the holes. Tighten the screws into the holes.
4.Align the latch to the bracket's tab. Attach the controller.
18 - English