Controls & Connections Rear, Send L & Send R FAN

Controls & Connections (Rear)
EFFECTS		]
[ RETURNLOOP	X !CAUTION!	]	MODEL REACTOR 112
			MODEL REACTOR 112
			Atomic Amplifiers LLC.
\ SEND - L			Orange CT.
\ SEND - L			Y	^
SEND - R		FUSE	0101010101	^


XVOLTAGE SELECTOR SWITCH:		Z

The Reactor 112 has a voltage selector switch and can be used in most countries. The switch selects between 115Volts (US use) and 240Volts (European use). IMPORTANT! For use in the United States the voltage selector switch should be set to the 115v setting at all times!

YAC LINE CONNECTOR:

Accepts a standard grounded AC cable.

ZFUSE HOLDER:

The Fuse Holder houses the power fuse (see pages 15 &16)

[RETURN:

The RETURN is unbalanced and provides an input directly to the Reactor’s amplifier. Inserting a jack into the RETURN interrupts the signal from the left output feed from the DS-1. The RETURN can be used as an outboard effect return (see page 7), or as the Reactor’s main input when using rack or floor style modelers and not using the DS-1 (see pages 11,12 &13).

\SEND – L & SEND – R

SENDS - L and R are unbalanced and are direct sends from the Left and Right outputs of the modeler when housed in the DS-1 docking unit. SEND – L can provide a feed to outboard effects devices or to a sound reinforcement or recording console (see page 8). SEND – L can be also be used to feed signal to a second Reactor for “mono stacking” (see page 11). SEND – R is switched so if engaged converts a modeler housed in the DS-1 for stereo output, SEND – R is used to send your modelers right signal to a second Reactor for stereo operation. (See page 8 & 10). Please note that SEND – L and SEND – R are proprietary to the DS-1 and are not operational when using modelers or preamps outside of the DS-1. Those products should be used according to their instruction manuals.

]FAN:

The Reactor 112 comes equipped with a special “studio quiet” cooling fan.

^ Make sure to register your Reactor either by mailing your product SERIAL NUMBER: registration card, or by logging onto www.atomicamps.com