MOUNTING LOCATION
Before you start the installation, it will be necessary to find a mounting location for the amplifier. Find a location in which the amplifier will receive adequate ventilation in order to dissipate the heat it develops during operation. Two popular mounting locations are in the trunk or under the seat.
Select the location in which you wish to mount the amplifier. Use caution when mounting amplifier, there are many wires, gas lines, vacuum lines, brake lines as well as a gas tank in the automobile. Make sure you know where they are when mounting the amplifier to avoid puncturing lines, shorting wires or drilling holes in the gas tank. Once you are ready, use a pencil to mark the mounting holes in the bottom panel. After you have marked the locations of the holes move amplifier out of the way and drill small starter holes to make the tapping screws easier to install. Use provided screws to tighten down the amplifier.
|
|
|
| INPUT |
|
|
PROTECT | FILTER | CH1 | CH3 | FILTER | ||
|
|
| ||||
|
| LEVEL | LEVEL |
| ||
POWER | HIGH | LOW |
|
| HIGH | LOW |
|
| FLAT |
|
|
| FLAT |
|
| MIN | MAX | MIN | MAX |
|
CH2 CH4
5