SPECIFICATIONS
| CSA50.2 | CSA50.4 | CSA200.3 |
Max Power | 200W | 400W | 400W |
Output Power @ 14.4 VDC : |
|
|
|
4 ohm | 50W x 2 | 50W x 4 | 50W x 2 + 1 x 100W |
2 ohm | 75W x 2 | 75W x 4 | 75W x 2 + 1 x 150W |
Bridged 4ohm | 150W x 1 | 150W x 2 | N/A |
Frequency Response + - 1dB | |||
S/N Ratio | >90dB | >90dB | >90dB |
THD with 80k filter | .30% | .30% | .30% |
Low Input Level | |||
Battery Voltage Range | |||
Crossover S/W for 1+2 channel | HP/FULL/LP | HP/FULL/LP | HP/FULL/LP |
Crossover Frequency | 200Hz | 200Hz | 200Hz |
Crossover Slope | 6dB/Oct | 6dB/Oct | 6dB/Oct |
Unbalanced Input (RCA Jack) | Yes | Yes | Yes |
Amplifier Fuse & Holder | 1 x 20A | 2 x 20A | 2 x 25A |
Size (L x W x H) | 7” x 10 1/4” x 2 5/8” | 12 1/2” x 10 1/4” x 2 5/8” | 12 1/2” x 10 1/4” x 2 5/8” |
| CSA150.1 | CSA300.1 |
Max Power | 300W | 500W |
Output Power @ 14.4 VDC : |
|
|
4 ohm | 100W x 1 | 250W x 1 |
2 ohm | 150W x 1 | 375W x 1 |
Bridged 4ohm | N/A | N/A |
Frequency Response + - 1dB | 20Hz- 130Hz | |
S/N Ratio | >90dB | >90dB |
THD with 80k filter | .15% | .03% |
Low Input Level | ||
Battery Voltage Range | ||
Crossover Type | LP | LP |
Variable Low Pass Range | 40Hz- 130Hz | |
Crossover Slope | 12dB/Oct | 12dB/Oct |
Bass EQ at FULL/LP | ||
Unbalanced Input (RCA Jack) | Yes | Yes |
Jack for Remote Control | N/A | Yes |
Amplifier Fuse & Holder | 1 x 25A | 2 x 25A |
Size (L x W x H) | 8 1/2” x 10 1/4” x 2 5/8” | 9 3/4” x 10 1/4” x 2 5/8” |
| * |
|
Due to continuing product improvement, specifications subject to change without notice.
16