SIGNAL CONNECTIONS
Connect the RCA output of the head unit (AM/FM cassette player, CD, or DAT) to the RCA input terminals of the amplifier.
To make these connections, we recommend high quality RCA cables, which are available at your local car audio retailer. Run signal wires away from electrical wires to avoid possibility of induced noise from the car's electrical system (i.e. popping noises or engine noise). Please note that when making these connections the signal inputs correspond with the speaker outputs. For example: If you connect the radios front right RCA to “CH 1” .......then speaker output “CH 1” will operate the
front right speaker.
CSA50.2
SIGNAL CONNECTIONS
PROTECT |
| INPUT |
|
|
|
| FILTER | ||
| L | LEVEL |
| |
|
|
|
| |
POWER |
|
| HIGH | LOW |
|
|
|
| FLAT |
| R | MIN | MAX |
|
L | R |
|
|
|
Optional full range line out connection to additional amplifiers in the system.
POWER
REMOTE | OUTPUT INPUT |
R | L |
|
LEVELX-OVER
MIN MAX | 40Hz 130Hz | 0 |
R
CSA150.1 & CSA300.1
SIGNAL CONNECTIONS
R L
|
|
| INPUT |
| |
PROTECT |
| CH1 | CH3 |
| |
FILTER | FILTER | ||||
| |||||
|
| LEVEL | LEVEL |
| |
POWER | HIGH | LOW | HIGH | LOW | |
|
| FLAT |
| FLAT | |
|
| MIN | MAX |
| |
CH2 CH4
CSA50.4 & CSA200.3
SIGNAL CONNECTIONS
R | L |
| FRONT |
L | R |
REAR |
|
8