Alphasonik PLD40E owner manual Specification S

Thank you for purchasing this Alphasonik product. Alpha- sonik products are specifically engineered and designed for the mobile audio environment. This manual contains important information about in- stallation, set-up procedures and integrating your new Alphasonik product into your vehicle. With proper care and installation, your new product will provide you with many years of high performance listening enjoyment. We recommend having an Authorized Alphasonik Dealer install your new product for optimal performance and to take advantage of our warranty program. Before installing your new product, please read through the manual to fully understand the application.

Before making any electrical connections, make sure that you disconnect the battery’s ground cable to prevent the possibility of short circuits or damage to your electronic equipment. If your vehicle’s stereo (head unit) comes with an Anti-theft code, DO NOT disconnect the battery. If you have the access code for the stereo (head unit), please refer to the vehicle’s owner’s manual.

Features

Nickel-Plated RCA Connectors	Four Channel Input & Output
Power On LED Indication	Four Channel Independent Tuning
SPECIFICATIONS
Minimum Input Level	200mV
Maximum Input Level	15V rms
Maximum Output Level	13.5V peak
Frequency Response	10Hz - 100kHz, +/-1dB
Total Harmonic Distortion	0.003%
Signal to Noise Ratio	-13dB
Balanced Input Noise Rejection	>60dB
Input Impedance	10 kohms
Output Impedance	150 ohms
Power Supply	High headroom PWM
Power Draw	150mA
Recommended Fuse Rating	1 Amp
Dimensions W x L x H	9" x 3" x 1"

S P E C I F I C A T I O N S

3