Alpine CDE-9852 owner manual Specifications, 21-EN

•Communication error

-Turn the ignition key off, and then set to ON again.

-Check the display by reconnecting between the iPod and the adapter, using the iPod cable.

•Caused by the iPod Software Version not being compatible with the unit.

-Update the iPod Software Version to be compatible with the unit.

Specifications

FM TUNER SECTION
Tuning Range	87.7-107.9 MHz
Mono Usable Sensitivity	9.3 dBf (0.8 µV/75 ohms)
50 dB Quieting Sensitivity	13.5 dBf (1.3 µV/75 ohms)
Alternate Channel Selectivity	80 dB
Signal-to-Noise Ratio	65 dB
Stereo Separation	35 dB
Capture Ratio	2.0 dB
AM TUNER SECTION
Tuning Range	530-1,710 kHz
Sensitivity (IEC Standard)	22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response	5 – 20,000 Hz (±1 dB)
Wow & Flutter (% WRMS)	Below measurable limits
Total Harmonic Distortion	0.008% (at 1 kHz)
Dynamic Range	95 dB (at 1 kHz)
Signal-to-Noise Ratio	105 dB
Channel Separation	85 dB (at 1 kHz)
PICKUP
Wave length	795 nm
Laser power	CLASS I
GENERAL
Power Requirement	14.4 V DC
	(11–16 V allowable)
Power Output	16 W RMS × 4*

*Primary amplifier ratings per CEA-2006 Standard

•Power output: measured at 4 Ohms and 1% THD+N

•S/N: 80 dBA (reference: 1 W into 4 Ohms)

Maximum Pre-Output Voltage	2 V/10 k ohms
Bass	+20/-14 dB at 100 Hz
Treble	±14 dB at 10 kHz
Weight	1.6 kg (3 lbs. 8 oz)
CHASSIS SIZE
Width	178 mm (7")
Height	50 mm (2")
Depth	162 mm (6-3/8")
NOSEPIECE SIZE
Width	170 mm (6-11/16")
Height	46 mm (1-13/16")
Depth	24 mm (15/16")

•Due to continuous product improvement, specifications and design are subject to change without notice.

21-EN