Installation
Detachable Front
Panel
Caution
When you install this unit in your car, do not remove the detachable front panel.
If the detachable front panel is removed during installation, you might press too hard and warp the metal plate that holds it in place.
Accessory List |
| |
• | Head unit | 1 |
• | Power cable | 1 |
• | Mounting sleeve | 1 |
• | Carrying case | 1 |
• | Bracket key | 2 |
• Screw (M5 × 8) | 4 | |
• | Owner’s Manual | 1 set |
•The main unit must be mounted within 35 degrees of the horizontal plane, back to front.
Less than 35°
Mounting Sleeve
1 (Included)
Dashboard
This Unit
Remove the Detachable Front Panel (refer to page 6). Slide mounting sleeve from main unit (see “Removal” on page 23).
Screw
2
Hex Nut (M5)
*2 Bolt Stud
Metal
Mounting
Strap
*1
This Unit
Ground Lead
Chassis
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis.
•For the screw marked “*2”, use an appropriate screw for the chosen mounting location.
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the
3Slide the
Install the detachable front panel.
Removal
1.Remove the detachable front panel.
2.Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.
This Unit
Bracket Keys (Included)
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
|
|
|
|
|
|
|
|
| Face plate | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Screws (M5 × 8) | |||||||
this unit |
|
|
|
| (Included) | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
| |||||
Ground Lead
*3
Mounting Bracket
•Secure the ground lead of the unit to a clean metal spot using a screw (*3) already attached to the vehicle’s chassis.
