Kenwood SYSTEM-H2EV installation manual Placing the Base and Cradle, Option 1 Windshield Mount

Page 4

KEN.4061 ReceiverCarHome Manual 11/19/04 9:37 AM Page 6

Do not use hard cloths or paint thinner, alcohol, or other volatile solvents to clean the unit. These may cause damage or remove indicator characters.

Suction cup base

cup is on the windshield.

Then rotate the lever

down, keeping the button

pressed down at the

!Warning

6Do not operate the unit in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.

Installation in a Vehicle

Note: Do not put Here2Everywhere in the Car Docking Cradle until you have completed the cradle installation.

Step 1: Placing the Base and Cradle

First, determine where you want to mount

Here2Everywhere.

There are two options for installing the

Here2Everywhere. Select the option and location that provides good visibility of and access to Here2Everywhere’s front panel while maintaining a safe driving experience.

Base nut

Pivot (where the

Cradle attaches)

Pivot

Button

Lever

 

DC12V

 

ANT

 

AUDIOOUT

FMOUT

 

 

Power

Audio Output

FM Out (optional) Antenna Input

Option 1: Windshield Mount

•Do not install Here2Everywhere on the windshield if it may obstruct your view while driving.

•Attach the Car Docking Cradle to the Car Windshield Docking Base using the four enclosed screws.

•Loosen the base nut on the Car Windshield Docking Base so that the suction cup portion rotates easily. Do not remove the base nut entirely.

•Make sure the suction cup lever is in the up position.

• Position the suction cup base on the desired windshield location. The word “PRESS” should be upright.

•Press the button marked “PRESS” while the suction

same time.

 

• The suction cup base

7

should be firmly

 

 

attached to the

 

windshield.

 

Note: To remove the Car Windshield Docking Base, return the lever to the up position before attempting to remove the Base.

Option 2: Console

(Professional) Mount

Ask the dealer where you purchased your

Here2Everywhere about professional installation options. One option is to have the dealer mount the Pivot of the Car Windshield Docking Base to the console or other available location in the vehicle. There are four screws to remove. The Pivot screw holes match the AMPS standard for mounting systems, so any AMPS-compatible bracket for your vehicle will accept the Pivot of the Docking Base. Many car audio dealers carry these brackets.

If you choose to do the console mount yourself, please observe the following guidelines:

Page 3 Page 5
Image 4
Page 3 Page 5
Contents SYSTEM-H2EV Table of Contents SYSTEM-H2EV Package ContentsSafety Precautions Cleaning the UnitWhen replacing a fuse, use only a new one with FCC WarningOption 1 Windshield Mount Placing the Base and CradleOption 2 Console Professional Mount Installing Antenna Attaching Power in a VehicleCradle Existing cable channels or wiring conduits Route the cable fromRed R ch Able audio input27, Antenna Aiming, for more information about Second-best antenna location is on an outside wallAntenna Follow these steps to activate your service Replace the battery coverTo jump back to the previous channel Basic Operation Removing Here2Everywhere From the Car Docking CradleSelecting Channels Selecting Music by Song Song List Mode Selecting Music by Artist Artist List ModeSelecting Music Setting/Using Channel Presets Setting Channel PresetsTuning Channel Presets Saving/Recalling Music InformationDisplay Options Menu OptionsChanging Display Modes Return to List Seek Lock/Unlock DeleteSirius ID Menu Option Display SettingsDevice Lock Options Antenna Aiming Audio LevelMemory Options Time Features Alarm ClockClock Program AlertFactory Defaults SpecificationsSleep Mode Auto ShutdownKenwood
Top Page Image Contents