KEN.4061 ReceiverCarHome Manual 11/19/04 9:37 AM Page 16
Note: If the display reads, “Updating Channels,” the receiver is getting the latest channel listing from the SIRIUS satellites. Give it 5 minutes to complete before moving to the next step.
4.If your Here2Everywhere has been properly con-
16 nected and the antenna is receiving the SIRIUS signal (Preview Channel #184), you will hear audio. If you do not hear audio,
•Channel #184 is the SIRIUS Preview Channel. You will not be able to tune to any other channels until you activate your SIRIUS subscription.
Note: If you’ve previously activated your subscrip- tion and then deactivated it, the Preview Channel will be mute. You will still see the message, “Call
5. Press the menu button on Here2Everywhere to |
enter the Menu Options. Make sure the first item, |
“SIRIUS ID,” is highlighted, then press the Control |
Knob (or the remote Select button). |
you. (You can also contact SIRIUS on the Internet at: www.siriusradio.com and click on the “Activate” link.)
8.Once your subscription has been activated, the display will read “Subscription Updated” for a few seconds. Press any button. The
Here2Everywhere will return to the Default display screen. At this point, try turning the Control Knob. You should have access to many channels now.
Default Screen
Removing Here2Everywhere
From the Car Docking
Cradle
When docked in the Car Docking Cradle,
Channel |
|
|
| Channel |
number |
|
|
| name |
Signal |
|
| Artist and | |
strength |
|
| song title | |
indicator |
|
|
|
|
Category |
| Clock | Preset bank | |
|
| indicator | ||
name |
|
|
| |
|
|
| ||
|
|
|
| |
Basic Operation
After you have activated your SIRIUS subscription, the Default Display screen will appear (see above). The Default Display screen has two font sizes: Medium and Large (medium is shown above). You can change font sizes by pressing the Display button.
On the above screen, you’ll see the current SIRIUS channel number (021), the channel name, the artist and song title, the category, the time, the preset bank indicator (A), and the antenna signal strength indicator. (When the unit is muted via the remote Mute button, the antenna signal strength indicator is replaced with a Mute indication.)
Press it again to see the list of currently playing artists, and again to see the currently playing song titles. Press the Control Knob (or on the remote, the Select button) to return to the default screen.
Selecting Channels | 17 |
Direct Tuning Using the Control Knob
To enter a specific channel number, press the Control Knob to enter Direct Tuning Mode. Turn the Control Knob to select the first digit of the channel number, then press the Control Knob to confirm this choice. Repeat this step for the second and third digits of the channel number.
Note: For channels under 100, simply press the control knob while the third digit is still blank.
Direct Tuning Using the Remote
Press the Direct button on the remote to enter Direct Tuning Mode. Use buttons
6. Your unit’s unique |
be displayed. Write the number down, and have |
your credit card handy. |
7. You can also call SIRIUS |
SIRIUS (7474), and the operator will instruct |
Here2Everywhere has a secure locking mechanism to hold it in place while the vehicle is in motion. To remove Here2Everywhere from the Car Docking Cradle, press the small button on the back of the unit and gently slide Here2Everywhere out.
Basic Operation and Screens
The previous screen is the Default screen. However, you can choose several different screens. Press and hold the Display button (press the List button on the remote) to see a list of channels.
Selecting Channels With
the Control Knob
To select a channel number through scrolling, turn the Control Knob to the left or right to dial up or down channels. The selected channel will automatically