Mitsubishi Electronics LDT422V manual Wireless Remote Control, Description

Page 11

Parts Name and Functions (continued)

Wireless Remote Control

1POWER button

Switches the power on/off.

*When the Power indicator is not glowing, no controls will work.

2INPUT buttons

Select the input signal from [RGB1] (HDMI), [RGB2] (DVI-D), [RGB3] (D-SUB), [RGB4] (BNC), [DVD/HD] (YPbPr), [VIDEO<S>], and [VIDEO].

NOTE:

The [CAT5] and [DISPLAY PORT] buttons don’t work.

3PICTURE MODE button

Selects the picture mode from [HIGHBRIGHT], [STANDARD], [sRGB], and [CINEMA]. See page 26.

HIGHBRIGHT:

The brightness is maximized.

STANDARD:

Factory default setting.

sRGB:

Suitable for color matching with sRGB-

 

compliant devices.

CINEMA:

Suitable for viewing movies.

4DISPLAY button

Displays the screen information. See page 42. When the remote control mode is LOCK, you can set it back to NORMAL by holding down the DISPLAY button for at least 5 seconds (see page 39).

5SET button

Accepts the settings made in the OSD menu.

6MINUS button (-)

Acts as (-) button to decrease the adjustment in the OSD menu. When the PIP mode is active, this button moves the sub picture to the left.

7AUTO SETUP button

Displays the auto setup menu. See pages 26 and 35.

8AUDIO INPUT buttons

Select the audio input from [AUDIO1], [AUDIO2], [AUDIO3], and [HDMI]. Note that [VIDEO<S>] and [VIDEO] cannot be selected. You can select [HDMI] only when the video input source is [RGB1].

9PIP (Picture-in-Picture) buttons

ON/OFF button: Switches the PIP or POP mode on/off.

INPUT button: Selects video to be displayed in the sub picture.

CHANGE button: Changes the main picture with the sub picture.

[Description]

PIP: Picture-in-Picture

The sub picture is displayed within the main picture. POP: Picture-out-Picture

The sub picture is displayed to the bottom right of the main picture.

SIDE BY SIDE

The main picture and the sub picture are displayed side by side.

NOTE:

When the screen size is [CUSTOM] or [REAL], the PIP and POP modes don’t work.

10STILL button

ON/OFF button:

Switches the still picture mode on/off.

CAPTURE button:

Captures the new picture.

11SIZE button

Selects the picture size from [FULL], [NORMAL], [CUSTOM], [DYNAMIC], and [REAL]. See page 42.

12MENU button

Switches the OSD menu mode on/off.

13UP button ( )

Acts as button to move the highlighted area up to select an adjustment item in the OSD menu. When the PIP mode is active, this button moves the sub picture up.

14PLUS button (+)

Acts as (+) button to increase the adjustment in the OSD menu. When the PIP mode is active, this button moves the sub picture to the right.

15EXIT button

Displays the previous OSD menu.

16DOWN button ( )

Acts as button to move the highlighted area down to select an adjustment item in the OSD menu. When the PIP mode is active, this button moves the sub picture down.

17MUTE button

Switches the mute function on/off.

18VOLUME buttons (VOL)

Pressing the plus (+) side increases the audio output level. Pressing the minus (-) side decreases the audio output level.

Downloaded From TV-Manual.com Manuals

English-10

 

Page 10 Page 12
Image 11
Page 10 Page 12
Contents LCD Display Monitor Index Features Declaration of Conformity Important InformationImportant Information Declaration of the Manufacturer DeclarationErgonomics Recommend UseContents Input Mute Buttons, Switch, and IndicatorParts Name and Functions ExitAnti-theft lock slot Connectors and TerminalsParts Name and Functions Description Wireless Remote ControlHow to remove the batteries How to Use the Wireless Remote ControlHow to install the batteries Preparation for use To avoid the monitor from falling 1Preparation for installationDetermine the installation location Do not Attempt to Install the LCD Monitor by YourselfUsing the wall mount or ceiling mount 2Installing the monitorInstalling and removing the stands Installing the main switch coverConditions 2Installing the monitorInstalling in the portrait position How to set-upHow to install the optional speakers 3Installing the speakersBefore connecting the signal cable to PC and Video Before making connections 4Connection procedureWiring diagram Prevention of disconnection of Hdmi cableConnecting with a computer analog connection 4Connection procedureConnection via the RGB2 in connector DVI-D Connecting with a computer digital connectionComponent device Connecting a video device component video/HDMI deviceEnglish-21 Connecting the power source 5Connecting the power cord to the monitorRemote control How to UseFlow of How to Using Volume control Schedule settingTurning on external devices Power Management FunctionPower Indicator 1Turning on all the connected devicesRGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO-S Video 2Selecting the video input3Controlling the external devices 4Auto-setup5Selecting the picture mode 7Picture adjustment 6Screen adjustment9Schedule setting 8Volume controlHow to set up schedule 9Schedule settingConnection 10Remote controlRS-232C Remote control Volume Down Ascii HEX Power onPower OFF Volume UPSub menu screen Configuration of OSD screenMain menu Basic operation of OSD Configuration and basic operation of OSD screenPicture OSD screen functionsScreen OSD screen functions Treble  Audio ResetAudio  BalancePIP Picture in Picture  Schedule CONFIGURATION1 OFF Timer  CONFIGURATION1 ResetCONFIGURATION2 CONFIGURATION3 Advanced Option Other functions Reference Other functionsPIP, POP function Troubleshooting IPS SpecificationsPin Assignment Europe North AmericaAsia Pacific
Top Page Image Contents