Mitsubishi Electronics LDT422V manual OSD screen functions, Picture

Page 35

OSD screen functions

PICTURE

BRIGHTNESS

You can adjust the brightness.

Press the PLUS (+) button to increase the brightness. Press the MINUS (-) button to decrease the brightness.

CONTRAST

You can adjust the contrast.

Press the PLUS (+) button to brighten dark areas in the image. Press the MINUS (-) button to darken bright areas in the image.

SHARPNESS

You can adjust the sharpness.

Press the PLUS (+) button to make the image look sharper. Press the MINUS (-) button to make the image look softer. NOTE : If you increase the sharpness setting value too

much, lines may appear double. In such a case, decrease the sharpness setting value.

COLOR

*For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs only.

When you select COLOR by pressing the SET button on the wireless remote control, the COLOR screen appears and you can adjust the following.

[COLOR]:

You can adjust all the colors at the same time. Press the PLUS (+) button to deepen the colors. Press the MINUS (-) button to lighten the colors.

[RED], [MAGENTA], [BLUE], [CYAN], [GREEN], or [YELLOW]: You can adjust each color individually. Press the PLUS (+) button to deepen the selected color. Press the MINUS (-) button to lighten the selected color.

NOTE : This adjustment doesn’t work in the sRGB picture mode.

BLACK LEVEL

You can adjust the brightness at the blackest point in the image. Press the PLUS (+) button to brighten dark areas in the image. Press the MINUS (-) button to darken bright areas in the image.

NOTE : This adjustment doesn’t work in the sRGB picture mode.

COLOR TEMPERATURE

You can adjust the color temperature.

The image becomes reddish as the color temperature decreases, and it becomes bluish as the color temperature increases.

NOTE : This adjustment doesn’t work in the sRGB picture mode.

TINT

*For the RGB1, DVD/HD, VIDEO<S>, and VIDEO inputs only.

When you select TINT by pressing the SET button on the wireless remote control, the TINT screen appears and you can adjust the following.

[TINT]:

You can adjust all the colors at the same time. Press the PLUS (+) button to add a green tint. Press the MINUS (-) button to add a purple tint.

[RED], [MAGENTA], [BLUE], [CYAN], [GREEN], or [YELLOW]: You can adjust each color individually. Press the PLUS (+) button to shift the selected color to the right around the color circle. Press the MINUS (-) button to shift the selected color to the left around the color circle.

REDMAGENTA

GAMMA SELECTION

You can select the gamma mode from NATIVE, S GAMMA, 2.2, 2.4 and OPTION.

NOTE : GAMMA is fixed to 2.2 in the sRGB picture mode.

NOISE REDUCTION

*For the VIDEO<S> and VIDEO inputs only. You can adjust the noise reduction level.

Press the PLUS (+) button to increase the value to lessen the noise.

FILM MODE

You can select the film mode function.

AUTO: Images of 24 frames per second are automatically detected and displayed.

OFF: Images of 24 frames per second are not automatically detected.

NOTE : When FILM MODE is AUTO, set SCAN CONVERSION to PROGRESSIVE. See page 41.

 

 

PICTURE RESET

YELLOW

BLUE

You can reset all the PICTURE settings to the factory

 

 

defaults.

GREENCYAN

Color circle

Downloaded From TV-Manual.com Manuals

English-34

 

Page 34 Page 36
Image 35
Page 34 Page 36
Contents LCD Display Monitor Index Features Declaration of Conformity Important InformationImportant Information Declaration of the Manufacturer DeclarationErgonomics Recommend UseContents Input Mute Buttons, Switch, and IndicatorParts Name and Functions ExitAnti-theft lock slot Connectors and TerminalsParts Name and Functions Description Wireless Remote ControlHow to remove the batteries How to Use the Wireless Remote ControlHow to install the batteries Preparation for use To avoid the monitor from falling 1Preparation for installationDetermine the installation location Do not Attempt to Install the LCD Monitor by YourselfUsing the wall mount or ceiling mount 2Installing the monitorInstalling and removing the stands Installing the main switch coverConditions 2Installing the monitorInstalling in the portrait position How to set-upHow to install the optional speakers 3Installing the speakersBefore connecting the signal cable to PC and Video Before making connections 4Connection procedureWiring diagram Prevention of disconnection of Hdmi cableConnecting with a computer analog connection 4Connection procedureConnection via the RGB2 in connector DVI-D Connecting with a computer digital connectionComponent device Connecting a video device component video/HDMI deviceEnglish-21 Connecting the power source 5Connecting the power cord to the monitorRemote control How to UseFlow of How to Using Volume control Schedule settingTurning on external devices Power Management FunctionPower Indicator 1Turning on all the connected devicesRGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO-S Video 2Selecting the video input3Controlling the external devices 4Auto-setup5Selecting the picture mode 7Picture adjustment 6Screen adjustment9Schedule setting 8Volume controlHow to set up schedule 9Schedule settingConnection 10Remote controlRS-232C Remote control Volume Down Ascii HEX Power onPower OFF Volume UPSub menu screen Configuration of OSD screenMain menu Basic operation of OSD Configuration and basic operation of OSD screenPicture OSD screen functionsScreen OSD screen functions Treble  Audio ResetAudio  BalancePIP Picture in Picture  Schedule CONFIGURATION1 OFF Timer  CONFIGURATION1 ResetCONFIGURATION2 CONFIGURATION3 Advanced Option Other functions Reference Other functionsPIP, POP function Troubleshooting IPS SpecificationsPin Assignment Europe North AmericaAsia Pacific
Top Page Image Contents