Mitsubishi Electronics LDT422V manual 2Installing the monitor, Installing in the portrait position

Page 16

P-2Installing the monitor (continued)

Installing in the portrait position

Conditions:

LDT422V can be installed in the portrait position, under the following conditions:

CAUTION:

Portrait position is available only when the monitor is wall- mounted or ceiling-mounted.

The stands (legs) can not be ﬁtted to the monitor in the portrait position.

Placing the monitor in the portrait position will shorten the average life of the LCD backlight.

Operation Environment (Temperature) shall be limited, as shown below:

Operation Environment:

Temperature	5 - 35°C / 41 - 95°F

Humidity	20 - 80% (without condensation)

Place the monitor in the position shown below.

Do not place the monitor in landscape in any other manner than shown.

Optional speakers (SP-422V) can not be attached when the LCD monitor is installed in the portrait position.

How to set-up

The “ ” logo should be on the LEFT side when viewed from the front of the monitor.

Landscape

Carry out as necessary

English

90°

LDT422V

logo

Clockwise

LDT422V

Downloaded From TV-Manual.com Manuals	English-15

Image 16

Contents LCD Display Monitor Index Features Important Information Declaration of ConformityImportant Information Declaration Declaration of the ManufacturerRecommend Use ErgonomicsContents Buttons, Switch, and Indicator Parts Name and FunctionsExit Input MuteParts Name and Functions Connectors and TerminalsAnti-theft lock slot Wireless Remote Control DescriptionHow to install the batteries How to Use the Wireless Remote ControlHow to remove the batteries Preparation for use 1Preparation for installation Determine the installation locationDo not Attempt to Install the LCD Monitor by Yourself To avoid the monitor from falling2Installing the monitor Installing and removing the standsInstalling the main switch cover Using the wall mount or ceiling mount2Installing the monitor Installing in the portrait positionHow to set-up ConditionsBefore connecting the signal cable to PC and Video 3Installing the speakersHow to install the optional speakers 4Connection procedure Wiring diagramPrevention of disconnection of Hdmi cable Before making connections4Connection procedure Connecting with a computer analog connectionConnecting with a computer digital connection Connection via the RGB2 in connector DVI-DConnecting a video device component video/HDMI device Component deviceEnglish-21 5Connecting the power cord to the monitor Connecting the power sourceHow to Use Flow of How to UsingVolume control Schedule setting Remote controlPower Management Function Power Indicator1Turning on all the connected devices Turning on external devices2Selecting the video input RGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO-S Video5Selecting the picture mode 4Auto-setup3Controlling the external devices 6Screen adjustment 7Picture adjustment8Volume control 9Schedule setting9Schedule setting How to set up scheduleRS-232C Remote control 10Remote controlConnection Ascii HEX Power on Power OFFVolume UP Volume DownMain menu Conﬁguration of OSD screenSub menu screen Conﬁguration and basic operation of OSD screen Basic operation of OSDOSD screen functions PictureOSD screen functions Screen Audio Reset Audio Balance  TreblePIP Picture in Picture CONFIGURATION1  OFF Timer CONFIGURATION1 Reset  ScheduleCONFIGURATION2 CONFIGURATION3 Advanced Option Other functions PIP, POP function Other functionsReference Troubleshooting Speciﬁcations IPSPin Assignment Asia Paciﬁc North AmericaEurope