Radio Operations
Selecting the Play Source:
Press the AM/FM button and “RADIO” appears in the display. After a brief moment either KHZ (AM) or MHZ (FM) will appear in the display.
Selecting the AM or FM:
Press the AM/FM button repeatedly and select from MHZ (FM) 1, 2, 3, KHZ (AM) 1 or 2.
FM Stereo | FM Band | AM Band |
Indicator | Indicator (MHz) | Indicator (KHz) |
(STEREO) |
|
|
|
|
|
|
|
|
Preset Bank Preset Button | Radio |
Number | Frequency |
Manually Tuning in a Radio Station:
Press the l�� button to tune in a lower radio frequency. Press the ��l button to tune in a higher radio frequency.
Note: The unit will automatically switch from FM Mono to FM Stereo when the signal strength increases to a stereo level. If the stereo signal should become weak, the unit will switch back to Mono. FM stereo reception is indicated when “STEREO” appears in the display.
Tuning in a Radio Station Using Seek:
Press the SEEK button and the tuner will scan up to the next strong station and stop seeking, then start playing.
Tuning in a Radio Station Using Scan:
Press the SCAN button and the tuner will scan up to the next strong station and pause for 10 seconds, then scan for the next strong station. To cancel this function press the SCAN button again.
11