Linear RV5080 installation manual Radio Operation, Disc Warnings

Page 12

Radio Operation (Continued)

Memorizing Radio Stations:

1.Press the AM/FM button to select either the MHz (FM) 1, 2, 3, KHz (AM) 1 or 2 radio bank.

2.Tune-in the desired radio station.

3.To memorize the station press and hold any- one of the six radio station recall buttons until the preset number appears.

Automatically Store Radio Stations:

1.Press the AM/FM button to select either the MHz (FM) or KHz (AM) radio band.

2.Press and hold the AS/PS button then release. The tuner will search for the strongest sta-

tions and store them into memory. The new

Hold

stations will replace stations that were previ-

 

ously stored in the current band.

 

Note: When the MHz (FM) band is selected the 18

 

strongest stations will be stored. When KHz (AM)

 

band is selected the 12 strongest stations will be

 

stored.

 

Scanning Stored Radio Stations:

1.Press the AM/FM button to select either the FM or AM radio band.

2.Press the AS/PS button then release. The tuner scans for preset stations stored in the current band and pauses for 6 seconds at each station. When a desired station is reached, press the AS/PS button again to stop scanning.

Disc Warnings

Handling and Cleaning:

Dirt, dust, scratches and warping disc will cause non-operation.

Do not place stickers on disc or scratch disc.

Do not warp discs.

A disc should always be kept in its case when not in use to prevent damage.

Do not place discs in the following places: Direct sunlight, Dirty, dusty and damp areas, Near car heaters, Car seats or dashboard.

Label side up

Do not touch the underside of the disc

Do not bend

Disc Cleaning:

Use a dry soft cloth to wipe disc the surface. If the disc is quite dirty, use a soft cloth slightly moist with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Wipe the disc from the center toward the outside edge

12

Image 12
Contents Operation Installation Manual Introduction IndexButton Locations and Functions 19 18 17 16Repeat Button Play/Pause and Mute Button ll Seek Up l ButtonsSeek Down l Buttons Controls Bass, Treble and BalanceRemote Control Button Locations and Functions General Operations Sound ControlsBass, Treble and Balance Control BassTreble BalanceSetting the Clock Speaker SelectionMute Selecting Speaker SetsSleep Timer Operation Setting the Sleep TimerCancelling the Sleep Timer Press the SLP button and Sleep 10 appears in the displayAlarm Operation Setting the Alarm TimerCancelling the Alarm Timer Radio Operations Radio Operation Disc WarningsPausing the Disc Music Disc OperationGeneral Operations Music Track SelectionStopping the Disc Ejecting the DiscRepeating a Music Track or Entire Disc Preview Music TracksMP3 Disc Operation Elapse TimesDisc File Selection Repeating a Music File or Entire Disc Random Music File Play OrderPausing the Movie Movie Disc OperationMenu Function Stopping a MovieFast Forward / Backwards Movie Play Slow MotionZooming the Image RepeatSetup Menu Ipod Mode Button Location and Functions Ipod OperationBrowse for a Song Pausing a Track Repeating a TrackPreview Tracks Press the Scan button to select the Songs menuManually Selecting the Ipod Source Pausing a MP3 Player USB InputSelecting USB Audio Play Source Stopping a MP3 PlayerAudio/Video Input Audio InputSelecting the Audio/Video Source Selecting the Audio SourceReset Button Additional FeatureArea Radio Frequency Adjustment Headphone OutputInstallation Trim RingBrown/Black Wire + Brown Wire Green/Black Wire + Green WireSpeaker Connections Wiring and Auxiliary Connections Black Wire Ground15A Fuse Movie Disc Player Optional Monitor Monitor Optional Safety Instructions Outdoor Antenna GroundingWarranty ONE 1 YEAR LIMITED WarrantyCopyright RV5080-UM Magnadyne Corporation