USB Input
Selecting USB Audio Play Source:
Press the USB/DISC button and “DISC” appears in the display. Remove the cover from the USB port. Insert the USB device and the files will automatically start playing.
Note: You can insert the USB device in any mode, the unit will automatically switch modes and start playing the USB device.
Disc File Selection: | File Number |
Press the ��l button to select a lower file. Press the l�� button to select a higher file. The file number will appear in the display.
File selection can also be selected by using the remote control. Press the file selection number button that corresponds to the file you want to play then press the ENTER button.
For example: If you want to play file 8, press but- ton 8, then the ENTER button.
If you want to play file 28, press 10+, then press button 2, followed immediately by button 8 and finally press the ENTER button. File 28 will start playing and “28” will appear in the display.
EQ | 1 | 2 | 3 |
BAND | 4 | 5 | 6 |
AS/PS | 7 | 8 | 9 |
ELAPSE | |||
AUDIO | SUB.TT | 10/0 | 10+ |
Pausing a MP3 Player:
Press the �ll button to pause the player, “PAUSE” will appear in the display. Press it again to resume play, and “PAUSE” will disappear from the display.
Stopping a MP3 Player:
POWEREJECT
Press the ⬛ button to stop play. To resume play, press the �ll button and play will begin from the first file.
MENU MODE
VOL SETUP
TONE
VOL
VOLENTER
23