Switching between digital and analog

Section

02Operating this unit

!When you connect AV component to the AV input with an RCA cable, you need set- ting in the initial setting menu. Refer to Set- ting the AV input on page 46.

%Use the rear RCA input to connect an auxiliary device featuring RCA output.

For more details, refer to the installation man- ual.

This auxiliary device is automatically set to

AUX2.

# You can only make this type of connection if the auxiliary device has RCA outputs.

Selecting AUX as the source

%Press SRC/OFF to select AUX (AUX1 or

AUX2) as the source.

# If the auxiliary setting is not turned on, AUX cannot be selected. For more details, refer to Switching the auxiliary setting on page 45.

When this unit is connected to the DEQ- P6600, you can switch to the AUX mode to analog or digital. However, when you use AUX2 as the source, make sure the AUX mode is set to analog. AUX digital should not be used with this unit.

1Press SRC/OFF to select AUX2 as the source.

Press SRC/OFF until AUX2 appears in the dis-

play.

# If the auxiliary setting is not turned on, AUX2 cannot be selected. For more details, refer to Switching the auxiliary setting on page 45.

2Press BAND/ESC to switch the modes. ANALOG (analog) — DIGITAL (digital)

Using the external unit

External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external

units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit.

Basic operations of the external unit are ex- plained below. Allocated functions are differ- ent depending on the connected external unit. For details concerning functions, refer to exter- nal unit’s owner’s manual.

Selecting the external unit as the source

%Press SRC/OFF to select EXTERNAL as the source.

Basic operation

Functions allocated to the following opera- tions are different depending on the con- nected external unit. For details concerning functions, refer to the connected external unit’s owner’s manual.

%Press BAND/ESC.

%Press and hold BAND/ESC.

%Press cor d.

%Press and hold cor d.

%Press aor b.

Using the functions allocated to 1/ S.Rtrv to 6/ keys

%Press any of 1/S.Rtrv to 6/.

Advanced operations

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se- lect.

50 En