| Section |
Available accessories | 03 |
|
|
1Use
Refer to Introduction of DSP adjustments on page 52.
2Press cor dto select the desired SFC mode.
MUSICAL
Note
If the source is a
Using the down-mix function
The
1Use
2Press cor dto switch the down mix settings.
!Lt/Rt – Down mix so that the surround components can be restored (decoded).
!Lo/Ro – Stereo mix the original audio that do not contain channel modes such as sur- round components.
Using the dynamic range control
The dynamic range refers to the difference be- tween the largest and softest sounds. The dy- namic range control compresses this
difference so that you can clearly hear sounds even at low volume levels.
!The dynamic range control is effective only on Dolby Digital sounds.
1Use
Refer to Introduction of DSP adjustments on
page 52.
# When playing other than the DVD disc, you cannot switch to DRC.
2Press ato turn the dynamic range con-
trol on.
# To turn dynamic range control off, press b.
Using the direct control
You can override audio settings to check for ef- fectiveness of your audio settings.
!All audio functions are locked out when the direct control is on except VOLUME and PLII.
1Use
Refer to Introduction of DSP adjustments on page 52.
2Press ato turn the direct control on.
# To turn direct control off, press b.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM volume level, which remains unchanged.
1Compare the FM volume level with the level of the source you wish to adjust.
2Use
Refer to Introduction of DSP adjustments on page 52.
Available accessories
En 55